Features

● DSI-TX interface

 MIPI® DSI compliant (Version 1.02.00– June 28,

2010)

- Support DSI Video Mode data transfer

- DCS Command for panel register access

 Supports up to 1 Gbps per data lane

 Supports1,2,3 or 4 data lanes

 Supports video data formats

- RGB888/666/565

● RGB interface

 Supports data formats

- 24-bit data bus

 RGB888/666/565 data formats

 Up to 166 MHz input clock

 Support VSYNC/HSYNC polarity option

(default LOW)

 Support DE polarity option (default High)

● I

2C/SPI Slave Interface (Option to select either I2C

or SPI interface)

 I

2C Interface (when CS=L)

- Support for normal (100KHz), fast mode (400

kHz) and Special mode (1 MHz)

- Configure all TC9594XBG internal registers

- Writing to DCS registers will trigger DCS

Command transmits over DSI

 SPI interface (when CS =H)

- SPI interface support for up to 25 MHz

operation.

- Configure all TC9594XBG internal registers

- Writing to DCS registers will trigger DCS

Command transmits over DSI

● GPIO signals

 2 GPIO signals

- Two GPIO signals can be configured as SPI

signals (SPI_SS and SPI_MISO)

- Or one GPIO signal can be configured as

Interrupt output signal, INT.

● System

 Clock and power management support to achieve

low power states

● Power supply inputs

 Core and MIPI® D-PHY: 1.2V

 I/O: 1.8V or 3.3V

● Typical power consumption

 WXGA @60fps: Pixel Clk: 74.25 MHz, DSIClk:

312 MHz  66.6 mW

 1080P @60fps: Pixel Clk: 148.5 MHz, DSIClk:

471 MHz  91.4 mW

 Power Down Condition is achieved by

turning off clock sources: PClk and RefClk.

● Operation temperature range

 Ta = -40 °C to 105 °C

● AEC-Q100 qualified with the following definition

 Grade 2 : -40 °C to 105 °C ambient

operating temperature range