1 Features

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Functional Safety-Compliant options – SIL 2 and

SIL 3 – available through request (LM5137F)

• Dual-channel synchronous buck DC/DC controller

– Wide input voltage range of 4V to 80V

– 1% accurate, fixed 3.3V, 5V, 12V, or adjustable

outputs from 0.8V to 60V

– 150°C maximum junction temperature

– Charge-pump gate drivers for 100% duty cycle

– No-load sleep current of 9μA (typical)

• Two interleaved synchronous buck channels

– Dual channel or single-output multiphase

– Stackable up to four phases

– SYNC in and SYNC out capability

– Selectable light-load PFM or FPWM

• Inherent protection features for robust design

– Internal hiccup-mode overcurrent protection

– Independent ENABLE and PGOOD functions

– Adjustable output voltage soft start

– VCC and gate-drive UVLO protection

– Shunt or inductor DCR current sensing

– Thermal shutdown protection with hysteresis

• Designed for ultra-low EMI requirements

– Dual Random Spread Spectrum (DRSS)

– Switching frequency from 100kHz to 2.64MHz

• VQFN-36 package with wettable flanks

• Create a custom design using the LM5137 with

WEBENCH® Power Designer

2 Applications

• Communications systems: wireless infrastructure

• Industrial: factory automation and control, robotics

• Enterprise systems: high-performance computing

• High-voltage battery-operated systems

3 Description

The LM5137 is an 80V synchronous buck DC/DC

controller offered from a family with three options for

functional safety: Capable, SIL 2, and SIL 3. The

device uses an interleaved, stackable, peak currentmode

architecture for easy loop compensation, fast

transient response, excellent load and line regulation,

and accurate current sharing with paralleled phases

for high output current.

A high-side switch minimum on-time of 22ns facilitates

large step-down ratios, enabling the direct conversion

from 12V, 24V, or 48V inputs to low-voltage rails

for reduced system design cost and complexity. The

LM5137 continues to operate during input voltage

dips as low as 4V, at 100% duty cycle if needed.

The 1.5μA sleep quiescent current with the output

voltage in regulation extends operating run-time in

battery-powered systems.