1 Features

• DisplayPort receiver

– DP/eDP v1.4 compatible

– Supports data lane swap and polarity inversion

– HBR3/HBR2/HBR/RBR link bit rates

– Main link: 1, 2, or 4 lanes

– Each lane up to 8.1Gbps

– AUX CH 1Mbps

– Hot plug detect (HPD)

– Multi-display (MST) and SST support

– Supports Symmetric and Asymmetric MST

– Daisy chaining and splitting

– SuperFrame unpacking capability

– Suitable for 4K at 60Hz video resolution

• FPD-Link IV interface

– Supports 13.5/12.528/10.8/6.75/3.375Gbps per

channel; Up to 27Gbps over dual channels

– Coax/STP interconnect support

– Port splitting to enable Y-cable interfaces

– MST and SuperFrame based data splitting to

different FPD channels

• Ultra-low latency control channel

– Three fast-mode plus I2C up to 1MHz (up to

3.4MHz for local bus access)

– High speed GPIOs

• Backwards compatibility

– IVI 94x and 92x product families

• Security and diagnostics

– Link diagnostics

– Voltage and temperature monitoring

– Line fault detection

– BIST and pattern generation

– CRC and error diagnostics

– ECC error correction for control bits

– Replica mode for redundancy

• Advanced link robustness and EMC control

– Spread Spectrum Clocking (SSC) input support

– Spread Spectrum Clocking Generation (SSCG)

– Data scrambling

• Low power operation

– 1.8V and 1.15V dual power supply

• AEC-Q100 qualified for automotive applications

– AEC-Q grade-level 2, –40°C to 105°C

– 64 pin QFN wettable flanks 9mm × 9mm

– ISO 10605 and IEC 61000-4-2 ESD compliant

2 Applications

• Automotive displays:

– Central Information Displays (CID)

– Rear Seat Entertainment (RSE)

– Digital instrument clusters

– Head units and HMI modules

– Head Up Display (HUD)

– Rear view and side mirror displays

3 Description

The DS90UB983-Q1 is a DisplayPort/eDP to FPDLink

III/IV bridge device. In conjunction with an FPDLink

IV deserializer, the chipset provides a high-speed

serialized interface over low-cost 50Ω coax or STP

cables. The DS90UB983-Q1 is a VESA DP Standard

v1.4 compatible device that supports advanced

features such as MST, HBR3, and SuperFrame

formats. The device is capable of supporting video

resolution up to 4K resolutions with 30-bit color. 8b10b

encoded DP data is serialized onto an FPD-Link IV

interface output. The FPD-Link IV interface supports

video and audio data transmission and full duplex

control, including I2C, and GPIO data over a single

channel or dual channels. Consolidation of video

data and control over FPD-Link IV lanes reduces the

interconnect size and weight and simplifies system

design. EMI is minimized by the use of low voltage

differential signaling, data scrambling, SSCG, and

randomization. In backward compatible mode, the

device supports up to 720p and 1080p resolutions

with 24 bit color depth over a single/dual link.