EURO TERMINAL BLOCKS

[ADAM TECHNOLOGIES INC.] INTRODUCTION: Adam Tech TS series Euro Terminal Blocks offer the advantages of our leading designed while providing one of the lowest applied cost interconnections possible. This series includes 3 variations of our standard block, a microminiature type for ultra space sv

CERAMIC TRIMMER CAPACITOR - 3MM - SMD

文件：551.23 Kbytes Page：1 Pages

3mm, SMD Ceramic Trimmer Capacitor

POWER NAND GATES

[Microsemi]

Power NAND Gates

NAND Gates • Dual 5-Input • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup) • Triple 4, 3, 4-Input (Passive Pulllup)

Power NAND Gates

NAND Gates • Dual 5-Input • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup) • Triple 4, 3, 4-Input (Passive Pulllup)

POWER NAND GATES

[Microsemi]

Power NAND Gates

NAND Gates • Dual 5-Input • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup) • Triple 4, 3, 4-Input (Passive Pulllup)

POWER NAND GATES

[Microsemi]

Power NAND Gates

NAND Gates • Dual 5-Input • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup) • Triple 4, 3, 4-Input (Passive Pulllup)

POWER NAND GATES

[Microsemi]

NOR Gates

NOR Gates

FLIP FLOPS

[SERTECH]

Flip Flops

Flip Flops

FLIP FLOPS

[SERTECH]

Flip Flops

FLIP FLOPS

[SERTECH]

NAND Gates

NAND Gates • Quad 2-Input (Active Pullup) • Dual 5-Input (Active Pullup) • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup)

NAND Gates

NAND Gates • Quad 2-Input (Active Pullup) • Dual 5-Input (Active Pullup) • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup)

NAND Gates

NAND Gates • Quad 2-Input (Active Pullup) • Dual 5-Input (Active Pullup) • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup)

NAND Gates

NAND Gates • Quad 2-Input (Active Pullup) • Dual 5-Input (Active Pullup) • Quad 2-Input (Open Collector) • Quad 2-Input (Passive Pulllup)

NAND Gates

General Description The 325 and 326 each contain two 2-input gates and two 3-input gates. The active pullup and 5mA output drive current of the 325 allow it to drive moderately long lines with no loss of noise immunity. The 326 has passive pullup resistors on the chip, so that outputs may be coll

NAND Gates

General Description The 325 and 326 each contain two 2-input gates and two 3-input gates. The active pullup and 5mA output drive current of the 325 allow it to drive moderately long lines with no loss of noise immunity. The 326 has passive pullup resistors on the chip, so that outputs may be coll

Gate Expander

General Description The 331 contains a diode array with the proper characteristics for use on the expander inputs of HiNIL logic devices. In addition, the chip provides two pullup resistors that allow each diode array to be used as a second-level AND gate. Features ● PROVIDES 5 ADDITIONAL INPUT

Hex Inverter Gates

Hex Inverter Gates

Hex Inverter Gates

Hex Inverter Gates

Multi-Function Gates

Multi-Function Gates ● Dual 2-Wide, 2-Input AND-OR-Invert ● Dual Expandable AND-NOR General Descriptions The 341 is an expandable gate with active pullup outputs. It is used in applications such as comparing two binary numbers. Large numbers may be compared by using the expander inputs.

Dual Monostable Multivibrator

General Description The 342 provides two one-shots that can be independently triggered and timed. Output pulse widths are timed by an external capacitor, making them independent of the input trigger pulse widths. Expander inputs and complementary, active pullup outputs are provided. Applications

Digital Comparator

Digital Comparator ● 4-Bit Features ● IDEAL FOR DIGITAL CONTROLS REQUIRING COMPARATORS ● CASCADES TO COMPARE LARGE BINARY OR BCD NUMBERS ● ACTIVE-HIGH OUTPUTS ● STROBBE INPUT

Dual Retriggerable Monostable Multivibrator

Features ● DELIVERS TIMED OUTPUT PULSES DETERMINED BY EXTERNAL COMPONENTS ● RETRIGGERABLE OPERATION ● HIGH IMMUNITY TO POWER TRANSIENTS ● ACTIVE PULLUP COMPLEMENTARY OUTPUTS ● INVERTING AND NON-INVERTING TRIGGER INPUTS ● 3.5 VOLTS (MIN) NOISE IMMUNITY

Multiplexers

General Description Teledyne Semiconductor 350 8-Bit, and 351 Dual 4-Bit Multiplexers were designed to enhance the functional capabilities of the high voltage logic designer. The devices exhibit the high noise immunity (3.5V min.) characteristic of the Teledyne HiNIL family. Each device is provi

Multiplexers

General Description Teledyne Semiconductor 350 8-Bit, and 351 Dual 4-Bit Multiplexers were designed to enhance the functional capabilities of the high voltage logic designer. The devices exhibit the high noise immunity (3.5V min.) characteristic of the Teledyne HiNIL family. Each device is provi

Timer

Features ● Timing - From Microseconds to Hours ● CMOS and HiNIL Compatible Input/Outputs ● High Current Drive Capability - 100 mA Source or Sink ● No Current Spiking on Output ● Pin Compatible With 555 Timer Typical Applications Time Delay Generation Clock Generation Pulse Genera

Dual 11-16V to 5 Volt Interface

General Description The 361 is used to convert HiNIL logic levels to DTL, TTL and RTL logic levels. It is very simple to use, nearly requiring connection to the VCC output level desired for adjustment of the output to the lower logic level. Features ● DROPS HINIL LOGIC LEVELS TO LOWER LOGIC LEV

5 Volt 11-16V Interface

5 Volt 11-16V Interface ● Dual Transistor ● Quad 2-Input NAND

5 Volt 11-16V Interface

5 Volt 11-16V Interface ● Dual Transistor ● Quad 2-Input NAND

Schmitt Trigger

Schmitt Trigger • Quad (Active Pullup) • Quad (Open Collector)

Schmitt Trigger

Schmitt Trigger • Quad (Active Pullup) • Quad (Open Collector)

Flip-Flop

General Description The 370 contains four clocked D-type flip-flops with a common clock input acting as an enable line. Each stage has complementary outputs with passive pullup. Applications include quad latches and registers with parallel inputs and outputs. Features ● IDEAL FOR STRAGE APPLICA

Counters

General Description The 371 is a master-slave decade counter that generates BCE outputs. It also provides two clock inputs to facilitate input enable control, direct set and reset inputs, and a ninth count (carry output) so 371 cascades can generate counts of 100, 1000, and so forth. Its outputs

Counters

General Description The 371 is a master-slave decade counter that generates BCE outputs. It also provides two clock inputs to facilitate input enable control, direct set and reset inputs, and a ninth count (carry output) so 371 cascades can generate counts of 100, 1000, and so forth. Its outputs

Shift Register

General Description The 375 4-bit shift register is a universal shift register and storage element. It can be used with either serial or parallel inputs and either serial or parallel outputs. For increased flexibility, both parallels entry enable and master reset pins are provided. To facilitate

BCD-to-Decade Decoder/Drivers

General Descriptions The 380 decodes BCD inputs (1•2•4•8 code) and drivers lamps and other devices requiring decoder outputs with high sink current at moderately high voltage.

BCD-to-Decade Decoder/Drivers

General Descriptions The 380 decodes BCD inputs (1•2•4•8 code) and drivers lamps and other devices requiring decoder outputs with high sink current at moderately high voltage.

BCD-to-Decoder/Drivers

General Description The 382 decodes BCD inputs (1•2•4•8 code) and drives the 10 segments of gas filled, cold cathode indicator tube. Since the 382 produces no ambiguous outputs, input codes for 10 to 15 will blank the tube. The outputs of a 371 decade counter are ideal as 382 inputs for display c

Decoder/Driver

General Description This device is characterized by seven open-collector outputs corresponding to the segments in LED display units such as the Monsanto Man-1. A 4-bit binary code applied to the data inputs causes the outputs to turn on in the conventional 7 segments code. Features ● 40 mA OUTP

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Dual Interface Buffers

Dual Interface Buffers • Dual 2-Input NAND/AND/OR/NOR • Dual 4-Input AND/NAND with Expander

Line Driver/Receiver

General Description The 396 dual differential line driver/receiver is designed for industrial logic applications requiring high immunity to electrical noise. The 396 has an extremely flexible hysteresis capability, allowing the user to adjust the switching threshold. Thus the 396 is also useful f

CERAMIC TRIMMER CAPACITOR ??3MM ??SMD

文件：241.7 Kbytes Page：1 Pages

NOR Gates

ASS汽车浪涌抑制器