TANTALUM ELECTROLYTIC CAPACITORS

文件：71.42 Kbytes Page：3 Pages

Solid Tantalum Surface Mount Chip Capacitors

文件：275.18 Kbytes Page：16 Pages

Hardware Version V1.4 HARDWARE MANUAL

1 Feature s The PANdrive™ PD28-1-1021 and PD28-3-1021 are small and compact full mechatronic solutions including NEMA11 / 28mm flange size stepper motors, the TMCM-1021 controller/ driver electronics and TRINAMIC sensOstep™ encoder for step-loss detection. The two PANdrives include stepper motor

PD42-1070 Hardware Manual

Features • Supply Voltage +9 to +24V DC • Step and direction interface • microPlyer™ to 256 μ-steps • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling • UART con1guration interface 1 Features The PANdrive™ PD

PD42-1070 Hardware Manual

Features • Supply Voltage +9 to +24V DC • Step and direction interface • microPlyer™ to 256 μ-steps • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling • UART con1guration interface 1 Features The PANdrive™ PD

PANDrive PD-110-42 and TMCM-110-42

1 Features The PD-110-42 is an intelligent stepper motor controller and driver module mounted directly on a 42mm flange motor. The TMCM-110 module converts the motor into a compact mechatronic device with bus oriented or stand-alone control. The motor, switches, power and the multi purpose I/Os

PANDrive PD-110-42 and TMCM-110-42

1 Features The PD-110-42 is an intelligent stepper motor controller and driver module mounted directly on a 42mm flange motor. The TMCM-110 module converts the motor into a compact mechatronic device with bus oriented or stand-alone control. The motor, switches, power and the multi purpose I/Os

PD20-1-1210 Hardware Manual

Features • Stepper Motor NEMA8 / 20mm • 0.0175Nm holding torque • with controller/driver • Linear and sixPoint™ ramps • +6. . . 30V DC supply voltage • Up to 0.6A RMS motor current • RS485 interface • integrated simple hall-sensor based encoder • 1x multi-purpose input Applications •

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

PD42-x-1240 Hardware Manual

Features • Stepper Motor NEMA17 / 42mm • 0.22 - 0.7Nm • with controller/driver • Linear and SixPoint™ ramps • +10. . . 30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated SensOstep™ encoder and support for external encoder • S/D interface • multi

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

TMCM-1240 Hardware Manual

Features • Single axis controller/driver for 2-phase bipolar stepper motor • Linear and sixPoint™ ramps • +10. . .30V DC supply voltage • Up to 2A RMS motor current • RS485, CAN & USB interface • integrated sensOstep encoder and support for external encoder • S/D interface • multi-purpos

PD42-x-1241 Hardware Manual

Features • Stepper Motor NEMA17 / 42mm • 0.4Nm or 0.8Nm holding torque • motor optimized for speed (>5k rpm possible @24V supply) • with controller/driver • Linear and sixPoint™ ramps • +10. . . 30V DC supply voltage • Up to 3A RMS motor current • RS485, CAN & USB interface • integrated

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

包装：散装 描述：OVER-VOLTAGE PROTECTION MODULE 电机，电磁阀，螺线管，驱动器板/模块 配件

包装：散装 描述：CURRENT SENSE BOARD 2A 开发板，套件，编程器 评估板 - 传感器

Erste Schritte mit dem Schrittmotormodul

Erste Schritte mit dem Schrittmotormodul

文件：152.51 Kbytes Page：2 Pages

1-Axis Motor Mounted Step/Direction Driver 1.1A/30V with RS-485

文件：472.22 Kbytes Page：1 Pages

1-Axis Motor Mounted Step/Direction Driver 1.1A/30V with RS-485

1-Axis Motor Mounted Step/Direction Driver 1.1A/30V with RS-485

文件：472.22 Kbytes Page：1 Pages

1-Axis Motor Mounted Step/Direction Driver 1.1A/30V with RS-485

文件：472.22 Kbytes Page：1 Pages

3-Axis Step/Direction Driver 2A/28.5V

文件：468.02 Kbytes Page：1 Pages

3-Axis Step/Direction Driver 2A/28.5V

1-Axis Step/Directionor SPI Driver 3.5A/48V

文件：515.789 Kbytes Page：1 Pages

1-Axis Step/Direction Driver 7A/75V

文件：251.89 Kbytes Page：1 Pages

1-Axis Piezo Motor Driver 3kHz/48V

文件：504.58 Kbytes Page：1 Pages

Evaluation Base board for TMCM-100, TMCM-301, TMCM-302 or TMCM-303

文件：474.27 Kbytes Page：1 Pages

Standard Modules for Stepper Motors

文件：250.3 Kbytes Page：1 Pages

1-Axis Controller/Driver 3A/28.5V with Encoder Inf

文件：680.36 Kbytes Page：1 Pages

1-Axis Controller/Driver 3.5A/48V with Encoder Inf

文件：324.45 Kbytes Page：1 Pages

MODULE FOR STEPPER MOTORS

文件：805.14 Kbytes Page：22 Pages

1-Axis Controller/Driver 3.5A/48V with Encoder Inf

文件：324.45 Kbytes Page：1 Pages

1-Axis Controller/Driver 2.0A/28.5V with Encoder Inf

文件：259.66 Kbytes Page：1 Pages

MODULE FOR STEPPER MOTORS

文件：285.61 Kbytes Page：2 Pages

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：1.97708 Mbytes Page：34 Pages

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：1.97708 Mbytes Page：34 Pages

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：1.97708 Mbytes Page：34 Pages

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：1.97708 Mbytes Page：34 Pages

Step and direction interface

文件：2.55911 Mbytes Page：23 Pages

Step and direction interface

文件：2.55911 Mbytes Page：23 Pages

Start in Trinamic쨈s Schrittmotorsysteme

文件：209.05 Kbytes Page：2 Pages

1-Axis Motor Mounted Controller/Driver 1.1A/34V

文件：421.17 Kbytes Page：1 Pages

Integrated encoder

文件：638.07 Kbytes Page：23 Pages

MODULE FOR STEPPER MOTORS

文件：870.53 Kbytes Page：18 Pages

1-Axis Motor Mounted Controller/Driver 2.8A/28.5V

文件：312.21 Kbytes Page：1 Pages

1-Axis Motor Mounted Controller/Driver 5.0A/36V

文件：346.39 Kbytes Page：1 Pages

1-Axis Motor Mounted Controller/Driver 5.0A/36V

文件：346.39 Kbytes Page：1 Pages

MECHATRONIC DRIVES WITH STEPPER MOTOR

文件：1.17241 Mbytes Page：25 Pages

MECHATRONIC DRIVES WITH STEPPER MOTOR

文件：1.17241 Mbytes Page：25 Pages

MECHATRONIC DRIVES WITH STEPPER MOTOR

文件：1.17241 Mbytes Page：25 Pages

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes Page：26 Pages

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes Page：26 Pages

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes Page：26 Pages

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes Page：26 Pages