Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

采集型隔离模块

TMxxxxCP系列信号调理模块，是前级毫伏级正负信号输入，后级正负信号输出的有源信号隔离模块，模块内部嵌入了一个高效微功率电源，可以在向内部信号处理电路供电的同时向外围电路输出一路隔离电源。在三线制和四线制应用场合，该产品大大简化了用户的设计，提高了PCB的空间利用率。由于内部采用电磁隔离技术，相比光耦隔离具有更好的温漂特性和线性度。此模块为三端隔离，信号输入、信号输出、电源输入相互隔离。

2-Channel BTL-Use Drivers

Overview The LA6530, 6531 are 2-channel BTL-use drivers designed for compact disc pickup actuation. Functions and Features • High output current (IO max=0.7A). • Wide operating voltage range (4 to 15V), • Low input bias current. • LA6530 ..... Output of amps 1 to 4 at muting-ON

2-channel Bridge Driver for CD and CD-ROMs

Overview The LA6530M is a 2-channel bridge (BTL) driver which was developed for compact discs and CD-ROMs. Features . High output current (IO max = 0.7 A). . Wide operating voltage range (4 to 15 V). . Small input bias current.

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free

Dual 5V Synchronous Buck Pulse-Width Modulator (PWM) Controller for DDRAM Memory VDDQ and VTT Termination

文件：540.84 Kbytes Page：17 Pages

Amplifier Transistor

文件：304.62 Kbytes Page：6 Pages