The TC3085 is a half-duplex RS-485 transceiver with ±15kV IEC 61000-4-2 contact discharge protectio...

• TIA/EIA RS-485/RS-422 Compliant\n• Integrated Transient Voltage Suppression \n• ESD Protection: ±15 KV \n• Data Rates: 500 kbps \n• Half-duplex Reduced slew rates for low EMI \n• Common-mode input range: −7 V to +12 V ;

Switch dimming / color linear LED constant current driver chip

文件：738.39 Kbytes Page：8 Pages

LED照明系列

LED照明（隔离+非隔离）

All Band TV Tuner IC with On-chip PLL

Description The CXA3250AN is a monolithic TV tuner IC which integrates local oscillator and mixer circuits for VHF band, local oscillator and mixer circuits for UHF band, an IF amplifier and a tuning PLL onto a single chip, enabling further miniaturization of the tuner. Features • Super

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receive

Optoisolator Photon Coupled Bilateral Analog FET

Description: The NTE3085 consists of a gallium arsenide infrared emitting diode coupled to a symmetrical silicon photo detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion–free control of low AC and DC analog signals.