Universal Flex Current Probe Accessory

文件：1.09916 Mbytes Page：2 Pages

包装：袋 描述：UNIVERSAL FLEX CLAMP PROBE ACCES 测试与计量 配件

包装：盒 描述：UNIVERSAL FLEX CLAMP PROBE ACCES 测试与计量 配件

FM FRONT-END CIRCUIT FOR RADIOS AND RADIO / CASSETTE TAPE RECORDERS (3V OPERATION)

5.8W AUDIO POWER AMPLIFIER FOR CAR-STEREO, CAR-RADIO OUTPUT

5.8W AUDIO POWER AMPLIFIER

5.8W AUDIO POWER AMPLIFIER CAR STEREO CAR RADIO AUDIO OUTPUT

5.5W DUAL POWER AMPLIFIER

TA7227, TA7227P Test Circuit

5.5W DUAL POWER AMPLIFIER

TA7227, TA7227P Test Circuit

TV SOUND IF AND AUDIO OUTPUT SUBSYSTEM

FEATURES . Nominal Power Output: 3W . Power Amplifier with Current Limiting and Thermal Shutdown. Wide Power Supply Range: 16V to 30V Low Quiescent Current: 33mA Typ. . Limiting Sensitivity 300μV Typ. . Excellent AM Rejection : 50dB Typ. . Differential Peak Detector-Requires One Tuned Coil

5.9W AUDIO POWER AMPLIFIER

5.9W AUDIO POWER AMPLIFIER The TA7252AP is audio power amplifier for consumer applications. It is designed for high power, distortion and low noise. Since the package is a 7pin SIP (single Inline Package), it greatly simplifier construction of a power amplifier both in design and assembly. it is

5.9W AUDIO POWER AMPLIFIER

5.9W AUDIO POWER AMPLIFIER The TA7252AP is audio power amplifier for consumer applications. It is designed for high power, distortion and low noise. Since the package is a 7pin SIP (single Inline Package), it greatly simplifier construction of a power amplifier both in design and assembly. it is

DC MOTOR DRIVER IC

The TA7259P/F/FG is a 3−phase Bi-directional motor driver IC. It designed as an output driver for motors in VTR (capstan, cylinder, and reel), tape deck, floppy disk, and record player applications. To detect position, use of a position sensing device is recommended. FEATURES Wide opera

DC MOTOR DRIVER IC

The TA7259P/F/FG is a 3−phase Bi-directional motor driver IC. It designed as an output driver for motors in VTR (capstan, cylinder, and reel), tape deck, floppy disk, and record player applications. To detect position, use of a position sensing device is recommended. FEATURES Wide opera

DC MOTOR DRIVER IC

The TA7259P/F/FG is a 3−phase Bi-directional motor driver IC. It designed as an output driver for motors in VTR (capstan, cylinder, and reel), tape deck, floppy disk, and record player applications. To detect position, use of a position sensing device is recommended. FEATURES Wide opera

DC MOTOR DRIVER IC

The TA7259P/F/FG is a 3−phase Bi-directional motor driver IC. It designed as an output driver for motors in VTR (capstan, cylinder, and reel), tape deck, floppy disk, and record player applications. To detect position, use of a position sensing device is recommended. FEATURES Wide opera

DC MOTOR DRIVER (3 PHASE Bi-DIRECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DRIECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DIRECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DRIECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DIRECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DRIECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DIRECTIONAL)

DC MOTOR DRIVER (3 PHASE Bi-DRIECTIONAL)

BRIDGE DRIVER

Full-Bridge Driver (H-Swithch) for DC Motor (Driver for Switching between Forward and Reverse Rotation) The TA7267BP is a Bridge Driver for brushed DC Motor Rotation control. Forward Rotation, Reverse Rotation, Stop and Braking operations are available. It’s designed for Loading and Reel Motor

BRIDGE DRIVER

Full-Bridge Driver (H-Swithch) for DC Motor (Driver for Switching between Forward and Reverse Rotation) The TA7267BP is a Bridge Driver for brushed DC Motor Rotation control. Forward Rotation, Reverse Rotation, Stop and Braking operations are available. It’s designed for Loading and Reel Motor

Full-Bridge Driver (H-Swithch) for DC Motor (Driver for Switching between Forward and Reverse Rotation)

Features z Output current up to 1.0 A (AVE.), and 3.0 A (PEAK) z Four different modes (forward rotation, reverse rotation, stop, and brake) are supported. z Built-in overcurrent protection and thermal shutdown circuit z Operating voltage range: VCC (opr.) = 6 to 18 V, VS (opr.) = 0 to 18 V z

Full-Bridge Driver (H-Swithch) for DC Motor (Driver for Switching between Forward and Reverse Rotation)

Features z Output current up to 1.0 A (AVE.), and 3.0 A (PEAK) z Four different modes (forward rotation, reverse rotation, stop, and brake) are supported. z Built-in overcurrent protection and thermal shutdown circuit z Operating voltage range: VCC (opr.) = 6 to 18 V, VS (opr.) = 0 to 18 V z

5.8W DUAL AUDIO POWER AMPLIFIER

5.8W AUDIO POWER AMPLIFIER. 19W BTL AUDIO POWER AMPLIFIER. The TA7270P/TA7271P are dual audio power amplifier for consumer applications. It is designed for high power, low distorion and low noise. It also contains various kind of protectors. Its suitable for car-audioj power amplifier with h

5.8W DUAL AUDIO POWER AMPLIFIER

5.8W AUDIO POWER AMPLIFIER. 19W BTL AUDIO POWER AMPLIFIER. The TA7270P/TA7271P are dual audio power amplifier for consumer applications. It is designed for high power, low distorion and low noise. It also contains various kind of protectors. Its suitable for car-audioj power amplifier with h

DUAL POWER OPERATIONAL AMPLIFIER

DUAL POWER OPERATIONAL AMPLIFIER The TA7272P is a dual power operational amplifier. It is intended for use especially DC MOTOR positioning system applications, such as Arm Driver (for Audiodisk Players), head or voice coil motor drivers (for Floppy and Winchester Disk Drivers) and any other power

DUAL POWER OPERATIONAL AMPLIFIER

DUAL POWER OPERATIONAL AMPLIFIER The TA7272P is a dual power operational amplifier. It is intended for use especially DC MOTOR positioning system applications, such as Arm Driver (for Audiodisk Players), head or voice coil motor drivers (for Floppy and Winchester Disk Drivers) and any other power

12W BTL AUDIO POWER AMPLIFIER

12W BTL AUDIO POWER AMPLIFIER The TA7274P is audio power amplifier for consumer application. This IC is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 12W (VCC=13.2V, RL=4Ω, THD=10) can be obtained. Since the package is a 7 pin SIP, (

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

DUAL BRIDGE DRIVER

The TA7279P and TA7279AP can control a DC motor in four modes (forward rotation, reverse rotation, stop, and brake), using their bridge driver best suited for switching between forward and reverse rotation. These ICs can deliver an output current of 1.0 A (AVE.) and 3.0 A (PEAK). They can adjus

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

5.8W DUAL, 22W BTL AUDIO POWER AMPLIFIER

The TA7280P, TA7281P are dual audio power amplifier for consumer applications. It is designed for high power, low distortion and low noise. It also contains various kind of protectors. It is suitable for car−audio power amplifier with high performance. The kinds of pin configuration are available:

LOW FREQUENCY POWER AMPLIFIER

DUAL BRIDGE DRIVER

The TA7288P is a bridge driver that is ideal for normal / reverse switching. This circuit offers four modes: normal rotation, reverse rotation, stop, and brake. The output current is 1.0 A (AVE.) and 2.0 A (PEAK). TA7288P has an ideal circuit configuration for VCR front tape loading and offers

PWM STEPPING MOTOR DRIVER

PWM STEPPING MOTOR DRIVER The TA7289P, TA7289F/FG are PWM solenoid driver designed especially for use high efficiency stepping motor control. It consist of 1.5A peak current drive capable output full bridge driver, oscillation circuit for PWM switching, 4bit D−A for output current control and

PWM STEPPING MOTOR DRIVER

PWM STEPPING MOTOR DRIVER The TA7289P, TA7289F/FG are PWM solenoid driver designed especially for use high efficiency stepping motor control. It consist of 1.5A peak current drive capable output full bridge driver, oscillation circuit for PWM switching, 4bit D−A for output current control and

Full-Bridge Driver for DC Motors (driver for controlling the forward and reverse rotations)

The TA7291AP/TA7291AS (J)/TA7291AF is a full-bridge driver to control the forward and reverse rotations. Each driver can select one of four modes: CW, CCW, stop, brake. The TA7291AP is designed to provide output currents of 1.0 A (typ.) and 2.0 A (peak). The TA7291AS (J)/TA7291AF is designe

Full-Bridge Driver for DC Motors (driver for controlling the forward and reverse rotations)

The TA7291AP/TA7291AS (J)/TA7291AF is a full-bridge driver to control the forward and reverse rotations. Each driver can select one of four modes: CW, CCW, stop, brake. The TA7291AP is designed to provide output currents of 1.0 A (typ.) and 2.0 A (peak). The TA7291AS (J)/TA7291AF is designe

Full-Bridge Driver for DC Motors (driver for controlling the forward and reverse rotations)

The TA7291AP/TA7291AS (J)/TA7291AF is a full-bridge driver to control the forward and reverse rotations. Each driver can select one of four modes: CW, CCW, stop, brake. The TA7291AP is designed to provide output currents of 1.0 A (typ.) and 2.0 A (peak). The TA7291AS (J)/TA7291AF is designe

Full-Bridge Driver for DC Motors (driver for controlling the forward and reverse rotations)

The TA7291AP/TA7291AS (J)/TA7291AF is a full-bridge driver to control the forward and reverse rotations. Each driver can select one of four modes: CW, CCW, stop, brake. The TA7291AP is designed to provide output currents of 1.0 A (typ.) and 2.0 A (peak). The TA7291AS (J)/TA7291AF is designe

BRIDGE DRIVER

TA72915 -> Correct Partnumber : TA7291S The TA7291P, TA7291S, TA7291F are Bridge Driver with Output voltage control.

BRIDGE DRIVER

TA72915 -> Correct Partnumber : TA7291S The TA7291P, TA7291S, TA7291F are Bridge Driver with Output voltage control.

BRIDGE DRIVER

TA72915 -> Correct Partnumber : TA7291S The TA7291P, TA7291S, TA7291F are Bridge Driver with Output voltage control.

5.8W DUAL AUDIO POWER AMPLIFIER. 22W BTL AUDIO POWER AMPLIFIER.

- High Power POUT (1) 22W (TYP.) (Vcc=14.4V, f=1kHz, THD 10, RL=40, BTL) POUT (2) 19W (TYP.) (Vcc=13.2V, f-1kHz, THD-10, RL=40, BTL) POUT (3) 15W (TYP.) (VCC-13.2V, f-1kHz, THD-1, RL-40, BTL) POUT (4) 5.8W (TYP.)/ch (Vcc 13.2V, f-1kHz, THD 10, RL=42, DUAL) Low Distortion THD (1)=0.03 (TY

5.8W DUAL AUDIO POWER AMPLIFIER. 22W BTL AUDIO POWER AMPLIFIER.

- High Power POUT (1) 22W (TYP.) (Vcc=14.4V, f=1kHz, THD 10, RL=40, BTL) POUT (2) 19W (TYP.) (Vcc=13.2V, f-1kHz, THD-10, RL=40, BTL) POUT (3) 15W (TYP.) (VCC-13.2V, f-1kHz, THD-1, RL-40, BTL) POUT (4) 5.8W (TYP.)/ch (Vcc 13.2V, f-1kHz, THD 10, RL=42, DUAL) Low Distortion THD (1)=0.03 (TY

5.8W×2CH for low frequency power increase

forte High power. : POUT=5.8W (typical)/channel (Vcc=13.2V、 f=1kHz、THD = 10、RL=4Ω) Low distortion rate. : THD=0.06 (Typical) (Vcc=13.2V、f=1kHz 、 POUT = 1W、RL=4Ω、Gy52dB) Low noise. : VNO=0.7mVrms (Typical) (Vcc=13.2V、RL = 4Ω、 Gy =

2W DUAL AUDIO POWER AMPLIFIER

文件：1.08194 Mbytes Page：4 Pages

Power Amplifier 5,8W

文件：34.52 Kbytes Page：1 Pages

5.8W AUDIO POWER AMPLIFIER

5.5W DUAL POWER AMPLIFIER

DUAL AUDIO POWER AMPLIFIER

文件：454.01 Kbytes Page：4 Pages

DUAL AUDIO POWER AMPLIFIER

文件：765.02 Kbytes Page：10 Pages

DUAL AUDIO POWER AMPLIFIER

文件：631.38 Kbytes Page：9 Pages

DUAL AUDIO POWER AMPLIFIER

TA7240AP

文件：22.42 Kbytes Page：1 Pages

5.8M DUAL AUDIO POWER AMPLIFIER 19W BTL AUDIO POWER AMPLIFIER

文件：733.85 Kbytes Page：13 Pages

5.8M DUAL AUDIO POWER AMPLIFIER 19W BTL AUDIO POWER AMPLIFIER

文件：733.85 Kbytes Page：13 Pages

DC MOTOR DRIVER IC

文件：618.95 Kbytes Page：15 Pages

DC MOTOR DRIVER IC

文件：618.95 Kbytes Page：15 Pages