SURFACE MOUNT SILICON ZENER DIODES

VZ : 3.9 - 200 Volts PD : 3 Watts FEATURES : * Complete Voltage Range 3.9 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

SURFACE MOUNT SILICON ZENER DIODES

VZ : 3.9 - 200 Volts PD : 3 Watts FEATURES : * Complete Voltage Range 3.9 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free

3 Watts Surface Mount Zener Diodes

Features ● Complete Voltage Range 3.9 to 200 Volts ● High peak reverse power dissipation ● High reliability ● Low leakage current

SURFACE MOUNT SILICON ZENER DIODES

Features Low leakage current High reliability High peak reverse power dissipation Complete Voltage Range 3.9 to 200 Volts

3W Silicon Zener Diodes

Features ◇ Complete Voltage Range 3.9 to 200 Volts ◇ High peak reverse power dissipation ◇ High reliability ◇ Low leakage current

3W 6.2V Zener diode

文件：476.733 Kbytes Page：2 Pages

稳压二极管

BIG TWIN MOTORCYCLES

GENERAL INFORMATION Any coil or combination of coils with a total primary resistance of at least 2.0 ohms can be used with this distributor. We recommend a 2-3 ohm coil for racing and a 3-4 ohm coil for street use. A coil with 4-5 ohms resistance may be used. However, performance may be reduced,

Computer Grade, Axial Leaded, Aluminum

Type 556 capacitors are designed for data processing, telecom and instrumentation applications requiring smaller size with extended temperature range. They have longer life and up to twice the ripple capability of +85 °C capacitors. Highlights • Small size • Extended life • Extended temperatur

556 Series Rack and Panel Connectors | .156 (3.96mm) Contact Spacing | 3 Pin

Features .156 (3.96mm) Contact Spacing Available in Plug and Receptacle. Edacon Hermaphroditic Contact Mating Design Contact Termination Options include Crimp, P.C. Tail, Wire Hole, Wire Wrap and Taper Tail Tools are Available for Contact Installation, Removal and Crimping RoHS Compliant

KEYSTONE ELECTRONICS CORP.

NOTES: TAPE AND REEL SPECIFICATIONS: 1. TAPE: MAT'L ALL CONDUCTIVE POLYSTYRENE CARRIER ANSI/EIA-481 STANDARD 1.260 [32.0] WIDE; .787 [20.0] PITCH 2. REEL: 13.0 [330.2] DIA. 250 PIECES OF PART NO. 556 PER REEL. 02NOTES: TAPE AND REEL SPECIFICATIONS: 1. TAPE: MAT'L ALL CONDUCTIVE POLYSTYREN

Drywall Punch

文件：1.8415 Mbytes Page：16 Pages