High Power GaAs SPDT Switch DC - 3 GHz

Features ● +39 dBm Typ. 1 dB Compression Point, -8V Control ● +65 dBm Typ. 3rd Order Intercept, -8V Control ● Insertion Loss of 0.4 dB Typical ● Low Power Consumption ● Fast Switching Speed

High Power GaAs SPDT Switch DC - 3 GHz

Features ● +39 dBm Typ. 1 dB Compression Point, -8V Control ● +65 dBm Typ. 3rd Order Intercept, -8V Control ● Insertion Loss of 0.4 dB Typical ● Low Power Consumption ● Fast Switching Speed

GaAs SPDT Reflective Switch DC-3 GHz with TTL/CMOS Control Input

GaAs SPDT Reflective Switch DC-3 GHz with TTL/CMOS Control Input

Drivers for GaAs FET Switches and Digital Attenuators

Introduction Many of M/A-COMs GaAs FET switches and digital attenuators cannot operate directly with simple TTL or CMOS logic, but instead require external circuits to provide appropriate control voltages. This application note, an update of M539, Drivers for GaAs FET MMIC Switches and Digital

GaAs SPDT Reflective Switch with TTL/CMOS Control Input, DC - 3.0 GHz

Description M/A-COM’s SW-110-PIN is a GaAs MMIC SPDT reflective switch with an integral silicon ASIC driver. This device is in a 16 lead ceramic surface mount package. These switches exhibit excellent performance and repeatability from DC to 3.0 GHz, with very low DC power dissipation. The SW-1

GaAs SPDT Reflective Switch with TTL/CMOS Control Input, DC-3.0 GHz

Description M/A-COM’s SW-110-PIN is a GaAs MMIC SPDT reflective switch with an integral silicon ASIC driver. This device is in a 16 lead ceramic surface mount package. These switches exhibit excellent performance and repeatability from DC to 3.0 GHz, with very low DC power dissipation. The SW-110

SPDT RF Switch 20 - 2000 MHz

Features ● Ultra Broadband ● High Isolation – 70 dB Typical ● Integral TTL Driver ● Hermetic Package

SPDT RF Switch 20 - 2000 MHz

Features ● Ultra Broadband ● High Isolation – 70 dB Typical ● Integral TTL Driver ● Hermetic Package

SPDT RF Switch, 20 - 2000 MHz

Features • Ultra Broadband • High Isolation: 70 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

SPDT RF Switch, 20 - 2000 MHz

Features • Ultra Broadband • High Isolation: 70 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

SP4T RF Switch 10 - 2000 MHz

Features ● Ultra Broadband ● High Isolation – 60 dB Typical ● Integral TTL Driver ● Hermetic Package

SP4T RF Switch 10 - 2000 MHz

Features ● Ultra Broadband ● High Isolation – 60 dB Typical ● Integral TTL Driver ● Hermetic Package

SP4T RF Switch, 10 - 2000 MHz

Features • Ultra Broadband • High Isolation: 60 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

SP4T RF Switch, 10 - 2000 MHz

Features • Ultra Broadband • High Isolation: 60 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

SPST RF Switch 10 - 1000 MHz

Features ● Low Loss - 0.5 dB Typical ● High Isolation - 60 dB Typical ● Integral TTL Driver ● Hermetic Package

SPST RF Switch 10 - 1000 MHz

Features ● Low Loss - 0.5 dB Typical ● High Isolation - 60 dB Typical ● Integral TTL Driver ● Hermetic Package

SPST RF Switch, 10-1000MHz

SPST RF Switch, 10 - 1000 MHz Features • Low Loss: 0.5 dB Typical • High Isolation: 60 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

SPST RF Switch, 10 - 1000 MHz

SPST RF Switch, 10 - 1000 MHz Features • Low Loss: 0.5 dB Typical • High Isolation: 60 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

SP4T RF Switch 10 - 1000 MHz

Features ● Low Loss – 0.6 dB Typical ● High Isolation – 60 dB Typical ● Integral TTL Driver ● Hermetic Package ● MIL-STD-883 Screening Available

SP4T RF Switch 10 - 1000 MHz

Features ● Low Loss – 0.6 dB Typical ● High Isolation – 60 dB Typical ● Integral TTL Driver ● Hermetic Package ● MIL-STD-883 Screening Available

SP4T RF Switch, 10 - 1000 MHz

Features • Low Loss: 0.6 dB Typical • High Isolation: 60 dB Typical • Integral TTL Driver • Hermetic Package • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

SPDT RF Switch 200 - 2000 MHz

Features ● Low Loss – 0.5 dB Typical ● High Isolation – 50 dB Typical ● Integral TTL Driver ● Hermetic Package

SPDT RF Switch 200 - 2000 MHz

Features ● Low Loss – 0.5 dB Typical ● High Isolation – 50 dB Typical ● Integral TTL Driver ● Hermetic Package

GaAs SPDT Reflective Switch 0.01 - 3 GHz

Description M/A-COMs SW-137 is a GaAs MMIC SPDT reflective switch with an integral Silicon ASIC driver. This device is in a 14-lead DIP package. These switches offer high intercept points over a wide bandwidth of operation, while maintaining low DC power dissipation. These switches exhibit excell

GaAs SPDT Reflective Switch 0.01 - 3 GHz

Description M/A-COMs SW-137 is a GaAs MMIC SPDT reflective switch with an integral Silicon ASIC driver. This device is in a 14-lead DIP package. These switches offer high intercept points over a wide bandwidth of operation, while maintaining low DC power dissipation. These switches exhibit excell

GaAs SPDT Reflective Switch, 0.01 - 3.0 GHz

Description M/A-COM’s SW-137 is a GaAs MMIC SPDT reflective switch with an integral Silicon ASIC driver. This device is in a 14-lead DIP package. These switches offer high intercept points over a wide bandwidth of operation, while maintaining low DC power dissipation. These switches exhibit excel

GaAs SPDT Reflective Switch, 0.01 - 3.0 GHz

Description M/A-COM’s SW-137 is a GaAs MMIC SPDT reflective switch with an integral Silicon ASIC driver. This device is in a 14-lead DIP package. These switches offer high intercept points over a wide bandwidth of operation, while maintaining low DC power dissipation. These switches exhibit excel

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Rocker Switches

Features/Benefits • Various designs up to 16 amps • Heavy duty and extended life cycles • SPST, SPDT and DPST options • Different symbols available Typical Applications • Household appliances • Industrial equipment • Audio & visual equipment • Telecommunication • Office equipment

Matched SPDT RF Switch 20 - 1500 MHz

Features ● Internally Terminated ● Integral TTL Driver ● Low Loss - 0.8 dB Typical

Matched SPDT RF Switch 20 - 1500 MHz

Features ● Internally Terminated ● Integral TTL Driver ● Low Loss - 0.8 dB Typical

Matched SPDT RF Switch, 20-1500MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.8 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Matched SPDT RF Switch, 20 - 1500 MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.8 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Matched SP3T RF Switch, 20 - 1500 MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.9 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Matched SP3T RF Switch, 20 - 1500 MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.9 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Matched SP4T RF Switch 20 - 1500 MHz

Features ● Internally Terminated ● Integral TTL Driver ● Low Loss - 0.9 dB Typical

Matched SP4T RF Switch 20 - 1500 MHz

Features ● Internally Terminated ● Integral TTL Driver ● Low Loss - 0.9 dB Typical

Matched SP4T RF Switch, 20 - 1500 MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.9 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

Matched SP4T RF Switch, 20-1500 MHz

Features • Internally Terminated • Integral TTL Driver • Low Loss: 0.9 dB Typical • 50 Ohm Nominal Impedance • MIL-STD-883 Screening Available

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

MEC Shake Switch

The Illustration of Shake Switch SW-180 Series 1. In silent surroundings it keeps on turning off state with any angle. When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on

包装：盒 描述：OPTICAL TOUCH SWITCH 传感器，变送器 光学传感器 - 光电，工业

包装：盒 描述：INDUSTRIAL EMBEDDABLE 4 PORT ETH 网络解决方案 交换机，集线器

4 Port Unmanaged Ethernet Switch 10/100

文件：1.95446 Mbytes Page：4 Pages

INTEGRATED CIRCUITS