单极电机驱动器

本产品为固定关断时间的自激式 PWM 定电流控制的 2 相单极电机驱动。\n通过内置电流检测电阻和小型ZIP（STA封装），相比以往产品可进一步减少外置元件。\n内置用于电机发生异常时（线圈短路&开路）的保护电路。\n另外，与以往产品一样，按照“时序”和“额定电流”分成多个系列，可根据使用的电机电流进行选择。 ・内置电路检测电阻和保护电路\n・主电源电压 VBB：46V（max）正常工作范围 10 到 44V\n・输出电流 Io： 1A、1.5A、2A（最大设定电流）\n均有提供\n・支持时钟输入方式微步距驱动\n（内置时序发生器）\n・采用自励磁 PWM 电流控制方式\n・内置同步斩波功能，可避免电机在处于保持状态\n发出可以听见的噪声\n・搭载休眠功能，可降低待机时消耗电流\n・ZIP 型 18 引脚全塑封装（STA封装）;

2-Phase to 2W 1-2 Phase Excitation Support, Built-in Sequencer

文件：55.99 Kbytes Page：2 Pages

封装/外壳：18-SSIP 成形引线 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MTR DRV UNIPOLAR 10-44V 18ZIP 集成电路（IC） 电机驱动器，控制器

HIGH-SPEED 2K x 8 DUAL-PORT STATIC RAM WITH INTERRUPTS

DESCRIPTION: The IDT71321/IDT71421 are high-speed 2K x 8 Dual Port Static RAMs with internal interrupt logic for interprocessor communications. The IDT71321 is designed to be used as a stand-alone 8-bit Dual-Port RAM or as a MASTER Dual-Port RAM together with the IDT71421 SLAVE Dual Port in 16-

HIGH-SPEED 2K x 8 DUAL-PORT STATIC RAM

Description The IDT7132/IDT7142 are high-speed 2K x 8 Dual-Port Static RAMs. The IDT7132 is designed to be used as a stand-alone 8-bit Dual-Port RAM or as a “MASTER” Dual-Port RAM together with the IDT7142 “SLAVE” Dual-Port in 16-bit-or-more word width systems. Using the IDT MASTER/SLAVE Dual-Por

HIGH-SPEED 2K x 8 DUAL-PORT STATIC RAM

Description The IDT7132/IDT7142 are high-speed 2K x 8 Dual-Port Static RAMs. The IDT7132 is designed to be used as a stand-alone 8-bit Dual-Port RAM or as a “MASTER” Dual-Port RAM together with the IDT7142 “SLAVE” Dual-Port in 16-bit-or-more word width systems. Using the IDT MASTER/SLAVE Dual-Por

CMOS LSI PLL FREQUENCY SYNTHSIZER LSI FOR 27MHz CB TRANSCEIVERS?

C MOS LSI PLL Frequency Synthsizer LSI for 27MHz CB Transceivers

Link Replicator for Fibre Channel, Gigabit Ethernet and HDTV

General Description The VSC7132 is a high performance serial Link Replicator for applications in Fibre Channel (1.0625Gb/s), Gigabit Ethernet (1.25Gb/s) and HDTV (1.485Gb/s). A serializer/deserializer, such as the VSC7123, would normally be connected to the IN+/- and OUT+/- ports in order to prov