SN74LVC827A 10-Bit Buffer/Driver With 3-State Outputs

1 Features • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.7 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on

10-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：279.33 Kbytes Page：13 Pages

SN74LVC827A 10-Bit Buffer/Driver With 3-State Outputs

文件：923.65 Kbytes Page：23 Pages

封装/外壳：24-TSSOP（0.173"，4.40mm 宽） 包装：管件 描述：IC BUF NON-INVERT 3.6V 24TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

SN74LVC827A 10-Bit Buffer/Driver With 3-State Outputs

1 Features • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.7 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on

SN74LVC827A 10-Bit Buffer/Driver With 3-State Outputs

1 Features • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.7 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on

10-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：279.33 Kbytes Page：13 Pages

10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC827A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDE

10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC827A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDE

10-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state

1. General description The 74LVC827A is a 10-bit buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable pins OE1 and OE2. A HIGH on pin OEn causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices.

10-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state

1. General description The 74LVC827A is a 10-bit buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable pins OE1 and OE2. A HIGH on pin OEn causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices.

10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC827A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDE