丝印代码：LC823A；9-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS

FEATURES · Operates From 1.65 V to 3.6 V · Inputs Accept Voltages to 5.5 V · Max tpd of 7.9 ns at 3.3 V · Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C · Supports Mixed-Mode Signal Operation on All

9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state

1. General description The 74LVC823A is a 9-bit D-type flip-flop with common clock (pin CP), clock enable (pin CE), master reset (pin MR) and 3-state outputs (pins Qn) for bus-oriented applications. The 9 flip-flops stores the state of their individual D-inputs that meet the set-up and hold tim

9-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger 3-State

DESCRIPTION The 74LVC823A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDE

9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state

1. General description The 74LVC823A is a 9-bit D-type flip-flop with common clock (pin CP), clock enable (pin CE), master reset (pin MR) and 3-state outputs (pins Qn) for bus-oriented applications. The 9 flip-flops stores the state of their individual D-inputs that meet the set-up and hold tim

9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state

1. General description The 74LVC823A is a 9-bit D-type flip-flop with common clock (pin CP), clock enable (pin CE), master reset (pin MR) and 3-state outputs (pins Qn) for bus-oriented applications. The 9 flip-flops stores the state of their individual D-inputs that meet the set-up and hold tim

9-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger 3-State

DESCRIPTION The 74LVC823A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDE