LOW-VOLTAGE 12-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER WITH INTERNAL PULLDOWN RESISTORS

Member of the Texas Instruments Widebus Family 4-Ω Switch Connection Between Two Ports Rail-to-Rail Switching on Data I/O Ports Ioff Supports Partial-Power-Down Mode Operation Make-Before-Break Feature Internal 500-Ω Pulldown Resistors to Ground Latch-Up Performance Exceeds 250 mA Per JE

LOW-VOLTAGE 12-BIT 1:2 MUX / DEMUX BUS SWITCH WITH INTERNAL PULL DOWN RESISTORS

APPLICATIONS: • 3.3V High Speed Bus Switching and Bus Isolation • Resource sharing FEATURES: • 5Ω A/B bi-directional switch • Isolation Under Power-Off Conditions • Make-before-break feature • Over-voltage tolerant • Internal 500Ω pull-down resistor to GND • Latch-up performance exceeds 1

LOW-VOLTAGE 12-BIT 1:2 MUX / DEMUX BUS SWITCH WITH INTERNAL PULL DOWN RESISTORS

APPLICATIONS: • 3.3V High Speed Bus Switching and Bus Isolation • Resource sharing FEATURES: • 5Ω A/B bi-directional switch • Isolation Under Power-Off Conditions • Make-before-break feature • Over-voltage tolerant • Internal 500Ω pull-down resistor to GND • Latch-up performance exceeds 1

LOW-VOLTAGE 12-BIT 1:2 MUX / DEMUX BUS SWITCH WITH INTERNAL PULL DOWN RESISTORS

DESCRIPTION: The CBTLV16292 is a single 12-bit multiplexing / demultiplexing bus switch, which provides high speed switching. This device has very low ON resistance, resulting in under 250ps propagation delay throught the switch. The demultiplexer side has a 500Ω resistor (R pulldown) termination

LOW-VOLTAGE 12-BIT 1:2 MUX / DEMUX BUS SWITCH WITH INTERNAL PULL DOWN RESISTORS

DESCRIPTION: The CBTLV16292 is a single 12-bit multiplexing / demultiplexing bus switch, which provides high speed switching. This device has very low ON resistance, resulting in under 250ps propagation delay throught the switch. The demultiplexer side has a 500Ω resistor (R pulldown) termination

LOW-VOLTAGE 12-BIT 1:2 MUX / DEMUX BUS SWITCH WITH INTERNAL PULL DOWN RESISTORS

DESCRIPTION: The CBTLV16292 is a single 12-bit multiplexing / demultiplexing bus switch, which provides high speed switching. This device has very low ON resistance, resulting in under 250ps propagation delay throught the switch. The demultiplexer side has a 500Ω resistor (R pulldown) termination