16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS

FEATURES · Member of the Texas Instruments Widebus™ Family · Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors · Output Ports Have Equivalent 26-W Series Resistors, So No External Resistors Are Required · Latch-Up Performance Exceeds 250 mA Per JESD 17 ·

Low Voltage 16-Bit D-Type Flip-Flop with Bushold and 26??Series Resistors in Outputs

General Description The ALVCH162374 contains sixteen non-inverting D-type flip-flops with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and output enable (OE) are common to each byte and can be shorted together for full 16-bit

3.3V CMOS 16-BIT EDGE- TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS AND BUS-HOLD

FEATURES: • 0.5 MICRON CMOS Technology • Typical tSK(o) (Output Skew) 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range • VCC = 2.5V ± 0.2V • CMOS power levels (0.4μ W typ

Low Voltage 16-Bit D-Type Flip-Flop with Bushold and 26??Series Resistors in Outputs

General Description The ALVCH162374 contains sixteen non-inverting D-type flip-flops with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and output enable (OE) are common to each byte and can be shorted together for full 16-bit

16-bit Edge triggered D-type Flip Flops with 3-state Outputs

Description The HD74ALVCH162374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as two 8-bit flip flops or one 16-bit flip flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip f

3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOP WITH 3-STATE OUTPUTS AND BUS-HOLD

DESCRIPTION: This 16-bit edge-triggered D-type flip-flop is built using advanced dual metal CMOS technology. The ALVCH162374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as two 8-bit flip-flops or one 16-bi