One Channel Direct Drive Speech Controller

INTRODUCTION SN65004 Series is 4 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 2-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes

One Channel Direct Drive Speech Controller

INTRODUCTION SN65007 is 7 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 4-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes, outpu

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

One Channel Direct Drive Speech Controller

INTRODUCTION SN65010 is a 10 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 4-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes, ou

One Channel Direct Drive Speech Controller

INTRODUCTION SN65012 is a 12 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 4-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes, ou

One Channel Direct Drive Speech Controller

INTRODUCTION SN65016 is 16 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 4-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes, outp

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

SN6501 Transformer Driver for Isolated Power Supplies

1 Features • Push-pull driver for small transformers • Single 3.3-V or 5-V supply • High primary-side current drive: – 5-V Supply: 350 mA (Max) – 3.3-V Supply: 150 mA (Max) • Low ripple on rectified output permits small output capacitors • Small 5-Pin SOT-23 Package 2 Applications • Is

One Channel Direct Drive Speech Controller

INTRODUCTION SN65020 is a 20 seconds one-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit. There is one 4-bit I/O port and built in a tiny controller. By programming through the tiny controller, user’s applications including section combination, trigger modes,

Two Channels Direct Drive Speech Controller

INTRODUCTION SN65031 is a 31 seconds two-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit and fixed current D/A output. There are two 4-bit I/O ports and built in a tiny controller. By programming through the tiny controller, user’s applications including section

Two Channels Direct Drive Speech Controller

INTRODUCTION SN65042 is a 42 seconds two-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit and fixed current D/A output. There are two 4-bit I/O ports and built in a tiny controller. By programming through the tiny controller, user’s applications including section

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

SN6505x Low-Noise 1-A Transformer Drivers for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 2.25 V to 5.5 V • High output drive: 1 A at 5 V supply • Low RON 0.25 Ω max at 4.5 V supply • Ultra-low EMI • Spread spectrum clocking • Precision internal oscillator options: 160 kHz (SN6505A) and 420 kHz (SN6505B)

Two Channels Direct Drive Speech Controller

INTRODUCTION SN65061 is a 61 seconds two-channel single chip voice synthesizer IC which contains a PWM Direct Drive Circuit and fixed current D/A output. There are two 4-bit I/O ports and built in a tiny controller. By programming through the tiny controller, user’s applications including section

SN6507 Low-Emission 36V Push-Pull Transformer Driver with Duty Cycle Control for Isolated Power Supplies

1 Features • Push-pull driver for transformers • Wide input voltage range: 3 V to 36 V – 60 V input voltage tolerance – Duty-cycle control for line regulation • 0.5 A switches with programmable current limit • Wide switching frequency range: 150 kHz to 2 MHz – Allows small-size transformer

SN6507 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Push-pull driver for isolation transformers • Wide input voltage range: 3 V to 36 V – Input voltage tolerance up to 60 V – Duty-cycle control for line regulation • 0.5-A switches with programmable current limit • Wide switching frequency range: 100 kHz to 2 MHz – Compatible wi

SN6507-Q1 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design: SN6507-Q1 • AEC-Q100 (Grade 1) qualified for automotive applications • Create a custom design using the SN6507-Q1 with the WEBENCH® Power Designer • Push-pull driver for isolation trans

SN6507 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Push-pull driver for isolation transformers • Wide input voltage range: 3 V to 36 V – Input voltage tolerance up to 60 V – Duty-cycle control for line regulation • 0.5-A switches with programmable current limit • Wide switching frequency range: 100 kHz to 2 MHz – Compatible wi

SN6507 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Push-pull driver for isolation transformers • Wide input voltage range: 3 V to 36 V – Input voltage tolerance up to 60 V – Duty-cycle control for line regulation • 0.5-A switches with programmable current limit • Wide switching frequency range: 100 kHz to 2 MHz – Compatible wi

SN6507-Q1 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design: SN6507-Q1 • AEC-Q100 (Grade 1) qualified for automotive applications • Create a custom design using the SN6507-Q1 with the WEBENCH® Power Designer • Push-pull driver for isolation trans

SN6507-Q1 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design: SN6507-Q1 • AEC-Q100 (Grade 1) qualified for automotive applications • Create a custom design using the SN6507-Q1 with the WEBENCH® Power Designer • Push-pull driver for isolation trans

SN6507-Q1 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design: SN6507-Q1 • AEC-Q100 (Grade 1) qualified for automotive applications • Create a custom design using the SN6507-Q1 with the WEBENCH® Power Designer • Push-pull driver for isolation trans

SN6507-Q1 Low-Emissions, 36-V Push-Pull Transformer Driver with Duty Cyle Control for Isolated Power Supplies

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design: SN6507-Q1 • AEC-Q100 (Grade 1) qualified for automotive applications • Create a custom design using the SN6507-Q1 with the WEBENCH® Power Designer • Push-pull driver for isolation trans

SN75176B/SN65176B Multipoint RS-485/RS-422 Transceivers

FEATURES Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422. Small Outline (SOIC) Package Option Available for Minimum Board Space. 22 ns Driver Propagation Delays. Single +5V Supply. −7V to +12V Bus Common Mode Range Permits ±7V Ground Difference Betwee

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SN75176B/SN65176B Multipoint RS-485/RS-422 Transceivers

FEATURES Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422. Small Outline (SOIC) Package Option Available for Minimum Board Space. 22 ns Driver Propagation Delays. Single +5V Supply. −7V to +12V Bus Common Mode Range Permits ±7V Ground Difference Betwee

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

SNx5176B Differential Bus Transceivers

1 Features • Bidirectional transceivers • Meets or exceeds the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 • Designed for multipoint transmission on long bus lines in noisy environments • 3-state driver and receiver outputs • Individ

USB PORT TRANSIENT SUPPRESSORS

FEATURES Qualified for Automotive Applications Design to Protect Submicron 3-V or 5-V Circuits from Noise Transients Port ESD Protection Capability Exceeds: − 15-kV Human Body Model − 2-kV Machine Model Available in a WCSP Chip-Scale Package Stand-Off Voltage . . . 6 V Min Low Current Lea

USB PORT TRANSIENT SUPPRESSORS

Features ● Ultra low capacitance: 35 pF typical ● Ultra low leakage: nA level ● Low operating voltage: 3V Or 5V ● Low clamping voltage ● Complies with following standards: - IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±20kV - IEC61000-4-4 (EFT) 40A (5/50ns)

USB PORT TRANSIENT SUPPRESSORS

FEATURES Qualified for Automotive Applications Design to Protect Submicron 3-V or 5-V Circuits from Noise Transients Port ESD Protection Capability Exceeds: − 15-kV Human Body Model − 2-kV Machine Model Available in a WCSP Chip-Scale Package Stand-Off Voltage . . . 6 V Min Low Current Lea

USB PORT TRANSIENT SUPPRESSORS

FEATURES Qualified for Automotive Applications Design to Protect Submicron 3-V or 5-V Circuits from Noise Transients Port ESD Protection Capability Exceeds: − 15-kV Human Body Model − 2-kV Machine Model Available in a WCSP Chip-Scale Package Stand-Off Voltage . . . 6 V Min Low Current Lea

USB PORT TRANSIENT SUPPRESSORS

FEATURES Qualified for Automotive Applications Design to Protect Submicron 3-V or 5-V Circuits from Noise Transients Port ESD Protection Capability Exceeds: − 15-kV Human Body Model − 2-kV Machine Model Available in a WCSP Chip-Scale Package Stand-Off Voltage . . . 6 V Min Low Current Lea

适用于隔离电源的低噪声 350mA、410kHz 变压器驱动器

Transformer Driver for Isolated Power Supplies

文件：1.17716 Mbytes Page：26 Pages

Transformer Driver for Isolated Power Supplies

文件：1.03601 Mbytes Page：29 Pages