TVS Diode Array For ESD and Latch-Up Protection?

Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Each device will protect up to four lines. They are unidi

Glass Passivated TVS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 1

TRANSIENT VOLTAGE SUPPRESSOR

For surface mounted applications in order to optimize board space Low profile space Glass passivated chip Low inductance Excellent clamping capability Very fast response time Typical IR less than 1μA at VRWM This is a Halogen Free device Terminals finish: 100 Pure Tin 200 W peak pulse po

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

文件：214.16 Kbytes Page：2 Pages

TVS Diode Array For ESD and Latch-Up Protection

文件：179.91 Kbytes Page：8 Pages

TVS管

Transient Voltage Suppressors

TVS管

Glass Passivated TVS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 1

Zener Transient Voltage Suppressor SOD??23 Flat Lead Package

Zener Transient Voltage Suppressor SOD−123 Flat Lead Package The SMF5.0A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability, high surge capability, low zener impedance and fast response time. Because of its small

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • For surface mounted applications in order to optimize board space. • Low profile paceage • Built-in strain relief • Low inductance • High temperature soldering : 260OC/10 seconds at terminals • In compliance with EU RoHS 2002/95/EC directives

200WATTS TRANSIENT VOLTAGE SUPPRESSOR 5.0 TO 170 VOLTS

Features • Stand-off Voltage 5-170 Volts • Uni and bi-directional type available (suffixCmeans bi-directional) • Surface Mount • Low Clamping Voltage • 200 Watt Peak Power Dissipation • Small, High Thermal Efficiency • Marking Code: See Electrical Characteristics Table • Case Material:Mold

SMD Transient Voltage Suppressor Diodes

Features Uni- and Bidirectional versions Peak pulse power of 200 W (10/1000 µs waveform) Very fast response time Low profile package Compliant to RoHS, REACH, Conflict Minerals 1) Typical Applications Over-voltage protection ESD protection Free-wheeling

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

Stand- off Voltage : 5 to 170 V Peak Power : 200 W FEATURES : * Stand-off voltage ; 5 - 170 Volts * Peak Power ; - 200 Watts @ 1 ms (SMF5.0A - SFM58A) - 175 Watts @ 1 ms (SFM60A - SFM170A) * Maximum clamp voltage @ Peak pulse current * Low leakage * Pb

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

VOLTAGE RANGE: 5.0 - 17 0V POWER: 200Wa t t s Features • For surface mounted applications • Low profile package • Low incremental surge resistance, excellent clamping capability • 200W peak pulse power capability with a 10/1000 µs wave from,repetition rate (duty cycle):0.01

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

SMD Transient Voltage Suppressor Diodes

Features Uni- and Bidirectional versions Peak pulse power of 200 W (10/1000 µs waveform) Very fast response time Low profile package Compliant to RoHS, REACH, Conflict Minerals 1) Typical Applications Over-voltage protection ESD protection Free-wheeling

Surface mounttransient voltage suppressor power 400 watts

SMF Series 5.0 To 190 V 200W Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Compatible with industrial standard package SOD-123 ♦ For surfac

RECTIFIER SPECIALISTS

VOLTAGE RANGE - 5.0 to 220Volts PEAK PULAE POWER - 200 Watts FEATURES * Glass passivated junction * 200 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low inductance * Fast response time

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Glass Passivated TVS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 1

Surface Mount Transient Voltage Suppressors (TVS)

SMF Series 5.0 To 190 V 200W Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Compatible with industrial standard package SOD-123 ♦ For surfac

TRANSIENT VOLTAGE SUPPRESSOR DIODES

VOLTAGE 5.0 THRU 220 Volts POWER DISSIPATION 200W FEATURES ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000Ps wave from,repetition rate (duty cycle):0.01 ◇

Transient Voltage Suppressors

Features RoHS compliant Glass passivated chip 200 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time

TRANSIENT VOLTAGE SUPPRESSOR

Features · Glass passivated chip · 200 W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle):0.01 · Excellent clamping capability · Low reverse leakage · Very fast response time · Lead and body according with RoHS standard

Surface Mount Transient Voltage Suppressor

Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 200 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast re

TRANSIENT VOLTAGE SUPPRESSOR

SMFxxxXX Series transient voltage suppressors are excellent overvoltage protective devices. The Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ■ Excellent clamping capabilit

3.3 To 190V 200W Surface Mount Transient Voltage Suppressors (TVS)

Features A Compatible with industrial standard package SOD-123 For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability 200W Peak power capability at 10 × 1000μs waveform

Surface Mount Transient Voltage Suppressor

FEATURES For surface mounted applications Low-profile package Ideal for automated placement Available in Unidirectional and Bidirectional 200 W peak pulse power capability with a 10/1000 waveform Low incremental surge resistance, excellent clamping capability Very fast response time High

5.0V-170V 175-200W

FEATURES Stand-off voltage ; 5 - 170 Volts Peak Power ; - 200 Watts @ 1 ms (SMF5.0A - SMF58A) - 175 Watts @ 1 ms (SMF60A - SMF170A) Maximum clamp voltage @ Peak pulse current Low leakage Pb Free / RoHS Compliant

For surface mounted applications

FEATURES For surface mounted applications Low-profile package Optimized for LAN protection applications Ideal for ESD protection of data lines in accordance with IEC 61000-4-2 (IEC 801-2) Ideal for EFT protection of data lines in accordance with IEC 61000-4-4 (IEC 801-4) ESD-protection acc

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features For surface mounted applications Low profile package clamping capability cycle):0.01 High temperature soldering guaranteed: 260 ℃/10 seconds, at terminals 200W peak pulse power capability wi t h a 10/1000 μ Low incremental surge resistance, excellent s wave from,repetition rate

Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount Transient Voltage Suppressors (TVS)

SMF Series 5.0 To 190 V 200W Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Compatible with industrial standard package SOD-123 ♦ For surfac

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 200W Working Voltage 5.0 to 190V Features • Glass passivated chip • Uni and Bidirectional unit • Excellent clamping capability • 200W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01 • Very-fast response time • Low l

TRANSIENT VOLTAGE SUPPRESSOR POWER 200 WATTS

DESCRIPTION The SMF x xx is available in SOD 123FL Pa ckage. FEATURES  For surface mounted applications in order to optimize board space.  Low profile package  Glass passivated junction  Low inductance  Plastic package has Underwriters Laboratory Flamma bility  Availabl e in SO

Zener Transient Voltage Suppressor SOD??23 Flat Lead Package

Zener Transient Voltage Suppressor SOD−123 Flat Lead Package The SMF5.0A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability, high surge capability, low zener impedance and fast response time. Because of its small

Zener Transient Voltage Suppressor SOD-123 Flat Lead Package

Zener Transient Voltage Suppressor SOD−123 Flat Lead Package The SMF5.0A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability, high surge capability, low zener impedance and fast response time. Because of its small

TRANSIENT VOLTAGE SUPPRESSOR POWER 200 WATTS

DESCRIPTION The SMF x xx is available in SOD 123FL Pa ckage. FEATURES  For surface mounted applications in order to optimize board space.  Low profile package  Glass passivated junction  Low inductance  Plastic package has Underwriters Laboratory Flamma bility  Availabl e in SO

200WATTS TRANSIENT VOLTAGE SUPPRESSOR 5.0 TO 170 VOLTS

Features • Stand-off Voltage 5-170 Volts • Uni and bi-directional type available (suffixCmeans bi-directional) • Surface Mount • Low Clamping Voltage • 200 Watt Peak Power Dissipation • Small, High Thermal Efficiency • Marking Code: See Electrical Characteristics Table • Case Material:Mold

200WATTS TRANSIENT VOLTAGE SUPPRESSOR 5.0 TO 170 VOLTS

Features • Stand-off Voltage 5-170 Volts • Uni and bi-directional type available (suffixCmeans bi-directional) • Surface Mount • Low Clamping Voltage • 200 Watt Peak Power Dissipation • Small, High Thermal Efficiency • Marking Code: See Electrical Characteristics Table • Case Material:Mold

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

SMD Transient Voltage Suppressor Diodes

Features Uni- and Bidirectional versions Peak pulse power of 200 W (10/1000 µs waveform) Very fast response time Low profile package Compliant to RoHS, REACH, Conflict Minerals 1) Typical Applications Over-voltage protection ESD protection Free-wheeling

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount Transient Voltage Suppressors (TVS)

SMF Series 5.0 To 190 V 200W Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Compatible with industrial standard package SOD-123 ♦ For surfac

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

Surface Mount ESD Protection Diodes

Features ◇ For surface mounted applications ◇ Low profile package ◇ Low incremental surge resistance,excellent clamping capability ◇ 200W peak pulse power capability with a 10/1000µs wave from,repetition rate (duty cycle):0.01 ◇ High temperature soldering guaranteed: 260℃/10 seconds

SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

VOLTAGE RANGE: 5.0 - 17 0V POWER: 200Wa t t s Features • For surface mounted applications • Low profile package • Low incremental surge resistance, excellent clamping capability • 200W peak pulse power capability with a 10/1000 µs wave from,repetition rate (duty cycle):0.01