Infrared Sensors Line Guide

FEATURES REFLECTIVE SENSORS HOA1395. Features: Side-looking plastic package • Phototransistor output • Infrared emitter and phototransistor detector in a single package • Low profile for design flexibility • Designed for short-distance detection • Enhanced sensitivity • Unfocused for sensi

Hermetic Optoschmitts

[HONEYWELL INC.]

Infrared Sensors Line Guide

文件：1.02693 Mbytes Page：18 Pages

Infrared Sensors Line Guide

文件：1.02693 Mbytes Page：18 Pages

流量计

SD5600-001 - 红外接收器, Optoschmitt, 12 °, 16 V, 4.5 V, -40 °C

The SD5600-001 is a single-chip Optoschmitt IC Detector mounted in a TO-46 metal can package. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10kR (nominal) pull-up resistor. Output rise and fall times are independent of the ·6° (nominal) acceptance angle\n·High noise immunity output\n·TTL/LSTTL/CMOS compatible\n·Buffer (SD5600) or inverting (SD5610) logic available\n·Mechanically & spectrally matched to SE3450/5450, SE3455/5455 & SE3470/5470 infrared emitting diodes;

封装/外壳：TO-46-3 透镜顶部金属罐 包装：散装 描述：PHOTODETECTOR SCHMITT TO-46 传感器，变送器 光学传感器 - 光检测器 - 逻辑输出

Thermally Protected High Voltage Linear Regulator

The HIP5600 is an adjustable 3-terminal positive linear voltage regulator capable of operating up to either 400VDC or 280VRMS. The output voltage is adjustable from 1.2VDC to within 50V of the peak input voltage with two external resistors. This high voltage linear regulator is capable of sourcing

TRIAC, 4 Amp

Description: The NTE5600 through NTE5607 TRIACs are designed primarily for full–wave AC control applications such as light dimmers, motor controls, heating controls and power supplies; or wherever full–wave silicon gate controlled solid–state devices are needed. TRIAC type thyristors switch from

GPS RF FRONT-END IC

DESCRIPTION The STB5600, using STMicroelectronics HSB2, High Speed Bipolar technology, implements a Global Positioning System RF front-end. The chip provides down conversion from the GPS (L1) signal at 1575 MHz via an IF of 20MHz to an output frequency of 4MHz suitable for ST20GP1 GPS processor.

UNIVERSAL MICROPROCESSOR POWER SUPPLY/CONTROLLERS

Universal Microprocessor Power Supply/Controllers The TCA5600, TCF5600 are versatile power supply control circuits for microprocessor based systems and are mainly intended for automotive applications and battery powered instruments. To cover a wide range of applications, the devices offer high ci

UNIVERSAL MICROPROCESSOR POWER SUPPLY/CONTROLLERS

Universal Microprocessor Power Supply/Controllers The TCA5600, TCF5600 are versatile power supply control circuits for microprocessor based systems and are mainly intended for automotive applications and battery powered instruments. To cover a wide range of applications, the devices offer high ci