5CH BTL Motor Drive IC

文件：530.35 Kbytes Page：13 Pages

电感式接近传感器

5CH BTL Motor Drive IC

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Gateway Modules

Features overview Antenna External whip or 50Ω antenna mountable Frequency TCM 310: 868.300MHz TCM 310U: 902.875MHz Data rate 125 kbps Modulation type TCM 310: ASK 868 MHz1) TCM 310U: FSK 902MHz1) Receiver Sensitivity (at 25°C)2) TCM 310: typ. –96 dBm (868MHz) TCM 310U: typ. -98 dBm (

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

짹80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver

General Description The MAX3053 interfaces between the control area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. It is primarily intended for industrial systems requiring data rates up to 2Mbps and features ±80V fault protection against shorts to high-voltag

짹80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver

General Description The MAX3053 interfaces between the control area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. It is primarily intended for industrial systems requiring data rates up to 2Mbps and features ±80V fault protection against shorts to high-voltag

짹80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver

General Description The MAX3053 interfaces between the control area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. It is primarily intended for industrial systems requiring data rates up to 2Mbps and features ±80V fault protection against shorts to high-voltag

4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS

文件：78.84 Kbytes Page：8 Pages

Power Transistors

文件：50.69 Kbytes Page：1 Pages