FUTABA SERVO

文件：53.38 Kbytes Page：1 Pages

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Gateway Modules

Features overview Antenna External whip or 50Ω antenna mountable Frequency TCM 310: 868.300MHz TCM 310U: 902.875MHz Data rate 125 kbps Modulation type TCM 310: ASK 868 MHz1) TCM 310U: FSK 902MHz1) Receiver Sensitivity (at 25°C)2) TCM 310: typ. –96 dBm (868MHz) TCM 310U: typ. -98 dBm (

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Transceiver Modules

Features overview Antenna Pre-installed whip antenna (TCM 320/300U) External whip or 50 Ω antenna mountable (TCM 300/300U) Frequency and data rate 868.300 MHz / 125 kbps (TCM 300/320)1) 902.875 MHz / 125 kbps (TCM 300U/320U) 1) Receiver Sensitivity (at 25°C) typ. –96 dBm (868MHz)2) typ. -9

Wireless Transceiver Gateway

Features overview Antenna 50 Ohm antenna (connected via host PCB) Supported Radio Frequencies 868.3 MHz ASK Data Rate 125 kbps Receiver Sensitivity (typ, at 25°C) (See Note 1) -92 dBm Maximum Input Power (typ, at 25°C) (See Note 1) -17 dBm (Product Revision DC) -23 dBm (Product Revisi

3 Watts - 28 Volts, Class C Microwave 3000 MHz

GENERAL DESCRIPTION The 3003 is a COMMON BASE transistor capable of providing 3 Watts Class C, RF output power at 3000 MHz. Gold metalization and diffused ballasting are used to provide high reliability and supreme ruggedness. The transistor uses a fully hermetic High Temperature Solder Sealed pa

KK Maxi-3.96mm & 5.08mm Modular Interconnection System

KEY FEATURES ■ Available on 3.96 mm and 5.08 mm center spacings ■ Polarisation via insertable keys and pegs ■ Allows connections anywhere on the board ■ Double cantilever style terminal ■ Selective gold plating options ■ End-to-end stacking capabilities ■ Locking ramp for improved mated ret

RF Manual 16th edition

10 MHz Sine/Square Wave Generator

[B&K Precision Corp.] 10 MHz Sine/Square Wave Generator The model 3003 signal generator is a cost-effective signal source that delivers clean and accurate DC to 10 MHz waveforms with frequency accuracy of 0.02 and 0.1Hz frequency resolution. Eight push wheel switches enable the user to quick

10 MHz Sine/Square Wave Generator

文件：493.97 Kbytes Page：1 Pages