Molded Metal Film Resistors

文件：142.04 Kbytes Page：2 Pages

Precision chip resistors

文件：644.55 Kbytes Page：15 Pages

FemtoClock Jitter Attenuator and Clock Generator

Features ▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 1.2W typical ▪ Low jitter, less than 100 fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) without degrading output ji

RC32012A-001 Custom Configuration

This datasheet addendum is to be used in conjunction with the overall RC32012A datasheet. This addendum indicates the register settings that are pre-configured in the internal One-Time Programmable (OTP) memory of the device by Renesas. These register settings represent the default values the re

FemtoClock Jitter Attenuator and Clock Generator

Features ▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 1.4W typical ▪ Low jitter, less than 100 fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) without degrading output ji

FemtoClock Jitter Attenuator or Clock Generator

The RC32112A regenerates and distributes ultra-low jitter clock outputs and features up to 6 independent frequency domains that can be either locked to the external reference clock or locked to a free-run crystal or oscillator. Digital PLLs (DPLLs) support hitless reference switching between referen • Two timing channels and six independent frequency domains\n• Output jitter below 100fs RMS\n• Digital PLLs (DPLLs) lock to any frequency from 0.5kHz to 1GHz\n• DPLLs / Digitally Controlled Oscillators (DCOs) generate any frequency from 0.5Hz to 1GHz\n• DCO outputs can be aligned in phase and frequ;

FemtoClock Network Synchronizer, Jitter Attenuator and Clock Generator

▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 1.4W typical ▪ Low jitter, less than 100 fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) and G.8273.2 T-BC for synchronous Eth

FemtoClock Network Synchronizer, Jitter Attenuator and Clock Generator

▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 1.4W typical ▪ Low jitter, less than 100 fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) and G.8273.2 T-BC for synchronous Eth

FemtoClock Network Synchronizer, Jitter Attenuator and Clock Generator

▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 1.4W typical ▪ Low jitter, less than 100 fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) and G.8273.2 T-BC for synchronous Eth

IDTTM InterpriseTM Integrated Communications Processor

Device Overview The RC32336 device is a member of the IDT™ Interprise™ family of integrated communications processors. It provides an effective solution for small office/home office (SOHO) applications including gateways and both single-band and dual-band wireless access points. Featuring a M

IDTTM InterpriseTM Integrated Communications Processor

Device Overview The RC32365 device is a member of the IDT™ Interprise™ family of integrated communications processors. This device is designed to address a range of communications applications that require the efficient processing of IPSec algorithms. These applications include gateways, wire

IDTTM InterpriseTM Integrated Communications Processor

Device Overview The RC32434 is a member of the IDT™ Interprise™ family of PCI integrated communications processors. It incorporates a high performance CPU core and a number of on-chip peripherals. The integrated processor is designed to transfer information from I/O modules to main memory wit

FemtoClock®2 Sub-100fs Universal Frequency Translator

Features • Jitter below 100fs RMS (10kHz to 20MHz) • Compliant with ITU-T G.8262 for synchronous Ethernet/OTN (EEC/OEC) and ITU-T G.8262.1 for enhanced synchronous Ethernet/OTN (eEEC/eOEC) • PLL core consists of fractional-feedback Analog PLL (APLL) which can optionally be steered by a Dig

FemtoClock 2 Jitter Attenuator and Clock Generator

Features ▪ Can be configured as clock generator or jitter attenuator/synchronizer ▪ Low power, less than 0.8W typical ▪ Low jitter, less than 50fs-RMS ▪ Compliant with ITU-T G.8262 and G.8262.1 option 1 and 2 for synchronous Ethernet Equipment Clock (EEC/eEEC) without degrading output jitte

FemtoClock®2 Sub-100fs Universal Frequency Translator

Features • Jitter below 100fs RMS maximum (10kHz to 20MHz) • PLL core consists of fractional-feedback Analog PLL (APLL) which can optionally be steered by a Digital PLL (DPLL) ○ Operates from an integrated 60MHz crystal ○ APLL frequency independent of input / crystal frequency ○ Operates

Ultra-Low Phase Noise System Synchronizer

Features ▪ UPN channel • Generates clocks with 88fs RMS of jitter • Generates 156.25MHz, with other frequencies available • Four differential HCSL outputs ▪ Six DPLL/DCO channels • Compliant with ITU-T G.8262.1 and G.8262 • Configurable as digital phase lock loop, digitally controlled osc

Rear Cover for Power Entry Module

文件：468.62 Kbytes Page：5 Pages

包装：散装 描述：RC320-01 REAR COVER 连接器，互连器件 电源接入连接器配件

包装：散装 描述：RC320-02 REAR COVER 连接器，互连器件 电源接入连接器配件

Low tolerance

文件：791.37 Kbytes Page：2 Pages

THICK-FILM CHIP RESISTOR

文件：5.45319 Mbytes Page：40 Pages

Passive components sales offices

文件：4.8118 Mbytes Page：20 Pages

Suitable size and packaging for surface mount assembly

文件：791.37 Kbytes Page：2 Pages

Owing to the reduced lead inductance, the high frequency characteristic is excellent.

文件：791.37 Kbytes Page：2 Pages

Circuit for high precision resistance and reliability.

文件：787.88 Kbytes Page：2 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

Chip Resistor

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

Chip Resistor

Circuit for high precision resistance and reliability.

文件：787.88 Kbytes Page：2 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

Supplier Samsung electro-mechanics

文件：82.05 Kbytes Page：2 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

Passive components sales offices

文件：4.8118 Mbytes Page：20 Pages

Owing to the reduced lead inductance, the high frequency characteristic is excellent.

文件：791.37 Kbytes Page：2 Pages

Circuit for high precision resistance and reliability.

文件：787.88 Kbytes Page：2 Pages

Suitable size and packaging for surface mount assembly

文件：791.37 Kbytes Page：2 Pages

THICK-FILM CHIP RESISTOR

文件：5.45319 Mbytes Page：40 Pages

Low tolerance

文件：791.37 Kbytes Page：2 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages

THICK FILM CHIP RESISTORS

文件：167.95 Kbytes Page：12 Pages