Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

16-Cell Battery Front End

Features ▪ High hot plug rating: 62V ▪ VCELL accuracy: ±5mV ▪ IPACK accuracy: ±0.2 ▪ 16-bit VCELL and IPACK measurements ▪ Charge/Load wakeup detection circuitry ▪ 4-pin GPIO port ▪ Integrated 3.3V regulator ▪ Supports I2C, SPI, and SWP communications Applications ▪ Light electric vehicl

4 to 10 Cell Battery Front End and Protector

Features ▪ VPACK voltages: 5V to 44V ▪ Hot plug tolerance ▪ Built-in low-side FET drivers ▪ Charger/load presence detection ▪ Cell open wire and system checks ▪ Autonomous detection and actions ▪ HVGPIO fuse blow configurable ▪ Support for wide range of current-sense resistors Application

3 to 10 Series Li-ion Battery Manager

1.1 Features ◼ Fully integrated battery management solution with battery capacity measurement and programmable protection capability. ◼ Supports up to 10 Li-ion or Li-Polymer battery cells in series. RAJ240090 supports 3 to 8 series cells, RAJ240100 supports 3 to 10 series cells. ◼ Integrat

3 to 8 / 10 Series Li-ion Battery Manager R01DS0301EJ0206

1.1 Features ◼ Fully integrated battery management solution with battery capacity measurement and programmable protection capability. ◼ Supports up to 10 Li-ion or Li-Polymer battery cells in series. RAJ240090 supports 3 to 8 series cells, RAJ240100 supports 3 to 10 series cells. ◼ Integrat

Ultra-low power consumption technology

文件：1.23631 Mbytes Page：69 Pages

3 to 10 Series Li-ion Battery Manager

1.1 Features ◼ Fully integrated battery management solution with battery capacity measurement and programmable protection capability. ◼ Supports up to 10 Li-ion or Li-Polymer battery cells in series. RAJ240090 supports 3 to 8 series cells, RAJ240100 supports 3 to 10 series cells. ◼ Integrat

3 to 8 / 10 Series Li-ion Battery Manager R01DS0301EJ0206

1.1 Features ◼ Fully integrated battery management solution with battery capacity measurement and programmable protection capability. ◼ Supports up to 10 Li-ion or Li-Polymer battery cells in series. RAJ240090 supports 3 to 8 series cells, RAJ240100 supports 3 to 10 series cells. ◼ Integrat

3 to 8 Series Li-ion Battery Fuel Gauge IC