丝印代码：R33D；REF33xx 3.9-μA, SC70-3, SOT-23-3, and UQFN-8, 30-ppm/°C Drift Voltage Reference

1 Features 1• Microsize Packages: SC70-3, SOT-23-3, UQFN-8 • Low Supply Current: 3.9 μA (typ) • Extremely Low Dropout Voltage: 110 mV (typ) • High Output Current: ±5 mA • Low Temperature Drift: 30 ppm/°C (max) • High Initial Accuracy: ±0.15% (max) • 0.1-Hz to 10-Hz Noise: 35 μVPP (REF33

丝印代码：R33D；REF33xx 3.9-μA, SC70-3, SOT-23-3, and UQFN-8, 30-ppm/°C Drift Voltage Reference

1 Features 1• Microsize Packages: SC70-3, SOT-23-3, UQFN-8 • Low Supply Current: 3.9 μA (typ) • Extremely Low Dropout Voltage: 110 mV (typ) • High Output Current: ±5 mA • Low Temperature Drift: 30 ppm/°C (max) • High Initial Accuracy: ±0.15% (max) • 0.1-Hz to 10-Hz Noise: 35 μVPP (REF33

Automotive Analog High Definition Link Encoder

▪ Analog Video Encoder • Software selectable control allows for single-ended, differential, and pseudo differential CVBS • 10-bit DAC • Integrated PLL • Internal test pattern generator • Independent amplitude adjustment for luminance and chrominance ▪ MIPI Input • MIPI CSI2 1.1 compliant

4A, High Efficiency Synchronous Buck Regulator for Automotive Applications

▪ VIN operating range from 4.0V to 42V ▪ VOUT = 5.0V or 3.3V (factory programmable) ▪ High efficiency synchronous buck regulator with efficiency up to: • 95%; VIN = 12V; VOUT = 5V; F = 440kHz • 92%; VIN = 12V; VOUT = 5V; F = 2.2MHz ▪ 2% VOUT accuracy over temperature, load, line

Automotive Low Power, High Sensitivity, Light-to-Digital Sensor with I2C Interface

Features ▪ Low power • 65μA maximum operating current • 0.5μA maximum shutdown current • Software shutdown and automatic shutdown ▪ Ideal spectral response • Close to Human eye response • Excellent IR and UV rejection ▪ Easy to use • Simple output code directly proportional to lux • I2C

Advanced Dual Channel ARM based Resistive Sensor Signal Conditioner IC

 Digital communication and calibration interfaces: o SPI up to 10MHz o I2C (Standard, Fast, Fast+) and I3C SDR o One-wire-interface (OWI), up to 100kBit/s  Accommodates nearly all resistive bridge sensor types (signal spans from 1mV/V up to 500mV/V)  Supports different sensor element con

Advanced Dual Channel ARM based Resistive Sensor Signal Conditioner IC

• Digital communication and calibration interfaces: o SPI up to 10MHz o I2C (Standard, Fast, Fast+) and I3C SDR o One-wire-interface (OWI), up to 100kBit/s • Accommodates nearly all resistive bridge sensor types (signal spans from 1mV/V up to 500mV/V) • Supports different sensor element conf

Gate Driver IC for IGBTs and SiC MOSFETs

- On-chip Micro Isolator (isolated circuit) ➢ High voltage isolation: 3750Vrms, 1min ➢ High CMTI (Common Mode Transient Immunity): over 150V/ns - High output gate drive circuit ➢ Gate drive output peak current (Source / Sink): 10A typ. / 10A typ. ➢ On-chip active miller clamp ➢ Soft turn-off

3 通道光电编码器专用芯片