51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

6-row 32 mA LED driver with boost regulator for LCD panel backlight

Description The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). F

6-rows 30 mA LEDs driver with boost regulator for LCD panels backlight

Description The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). F

6-rows 30 mA LEDs driver with boost regulator for LCD panels backlight

Description The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). F

6-row 32 mA LED driver with boost regulator for LCD panel backlight

Description The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). F

2 to 4-cell Li-ion, Li-FePO4 battery charger with SMBus interface, N-channel RBFET and BATFET MOSFET selectors

Description The PM6610 is a high efficiency battery charger with SMBus communication interface. It includes a synchronous switching DC-DC converter with N-channel high-side and low-side Power MOSFET drivers. The possibility to set the switching frequency with SMBus by choosing one of the tw

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATT MEDICAL SWITCHING POWER SUPPLIES

DESCRIPTION The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for

51-65 WATTS SINGLE OUTPUT AC/DC MEDICAL

Features • Low safety ground leakage current. • Wide input range 90 to 264Vac. • Input surge current protection. • Overvoltage protection. • Overcurrent protection. • Compact, open PCB construction. • 100 burn-in at full rated load.

Monolithic VR for chipset and DDR2/3 supply for ultra-mobile PC (UMPC) applications

Description The PM6641 is a monolithic voltage regulator module specifically designed to supply DDR2/3 memory and chipset in ultra-mobile PC and real estate constrained portable systems. It integrates three independent, adjustable, constant frequency buck converters, a ±2 Apk low drop-out (LDO)

Monolithic VR for chipset and DDR2/3 supply for ultra-mobile PC (UMPC) applications

Description The PM6641 is a monolithic voltage regulator module specifically designed to supply DDR2/3 memory and chipset in ultra-mobile PC and real estate constrained portable systems. It integrates three independent, adjustable, constant frequency buck converters, a ±2 Apk low drop-out (LDO)

350 mA adjustable step-down regulator

Description The PM6644 is a 350 mA valley current limit stepdown regulator capable of delivering an adjustable output voltage in the range between 0.9 V and 8 V. A fixed value of output voltage is also available (3.47 V), saving the external resistor divider. It is housed in a small DFN10 3x3 pac

350 mA adjustable step-down regulator

Description The PM6644 is a 350 mA valley current limit stepdown regulator capable of delivering an adjustable output voltage in the range between 0.9 V and 8 V. A fixed value of output voltage is also available (3.47 V), saving the external resistor divider. It is housed in a small DFN10 3x3 pac

Complete DDR2/3 memory power supply controller

Description The device PM6670 is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a Constant On-Time (C.O.T.) buck controller, a 2Apk sink/source Low Drop Out regulator and a 15mA low noise buffered reference. The C.O.T. architecture assures fast tra

Complete DDR2/3 memory power supplies controller

Description The device PM6670AS is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a constant on-time (COT) buck controller, a 2 Apk sink/source low drop out regulator and a 15 mA low noise buffered reference. The COT architecture assures fast trans

Complete DDR2/3 memory power supplies controller

Description The device PM6670AS is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a constant on-time (COT) buck controller, a 2 Apk sink/source low drop out regulator and a 15 mA low noise buffered reference. The COT architecture assures fast trans

Complete DDR2/3 memory power supply controller

Description The device PM6670S is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a constant on-time (COT) buck controller, a 2 Apk sink/source low drop out regulator and a 15 mA low noise buffered reference. The COT architecture assures fast transi

Complete DDR2/3 memory power supply controller

Description The device PM6670S is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a constant on-time (COT) buck controller, a 2 Apk sink/source low drop out regulator and a 15 mA low noise buffered reference. The COT architecture assures fast transi

High efficiency step-down controller with embedded 2 A LDO regulator

Description The PM6675S device consists of a single high efficiency step-down controller and an independent Low Drop-Out (LDO) linear regulator. The Constant On-Time (COT) architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integra

High efficiency step-down controller with embedded 2 A LDO regulator

Description The PM6675S device consists of a single high efficiency step-down controller and an independent Low Drop-Out (LDO) linear regulator. The Constant On-Time (COT) architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integra

No Rsense dual step-down controller with adjustable voltages for notebook system power

Description PM6680 is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant s

Dual synchronous step-down controller with adjustable output voltages plus LDO

Description PM6680A is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with loss less current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant

Dual synchronous step-down controller with adjustable output voltages plus LDO

Description PM6680A is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with loss less current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant

No Rsense dual step-down controller with adjustable voltages for notebook system power

Description PM6680 is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant s

Dual step-down controller with adjustable LDO

Description PM6681A is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant

Dual step-down controller with adjustable LDO

Description PM6681A is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant

DUAL STEP-DOWN CONTROLLER WITH AUXILARY VOLTAGES FOR NOTEBOOK SYSTEM POWER

Description PM6685 is a dual step-down controller specifically designed to provide extremely high efficiency conversion with loss-less current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant s

6-rows 30 mA LEDs driver with boost regulator for LCD panels backlight

封装/外壳：24-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC LED DRVR RGLTR PWM 24VFQFPN 集成电路（IC） LED 驱动器

MSM6025™ AND RF CMOS SINGLE-BAND CHIPSET SOLUTION

2 to 4-cell Li-Ion, Li-FePO4 battery charger with SMBus interface, N-channel RBFET and BATFET MOSFET selectors

文件：1.028119 Mbytes Page：30 Pages

2 to 4-cell Li-Ion, Li-FePO4 battery charger with SMBus interface, N-channel RBFET and BATFET MOSFET selectors

文件：1.028119 Mbytes Page：30 Pages

封装/外壳：20-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BAT CHG MULT-CHEM 2-4CL 20QFN 集成电路（IC） 电池充电器

Single-phase controller for Intel MVP 6.5 render voltage regulator,

文件：1.93614 Mbytes Page：53 Pages

Single-phase controller for Intel MVP 6.5 render voltage regulator,

文件：1.93614 Mbytes Page：53 Pages

Very fast load transient response using constant on-time control loop

文件：656.73 Kbytes Page：47 Pages

Latched OVP and UVP

文件：265.09 Kbytes Page：15 Pages

High efficiency step-down controller with embedded 2 A LDO regulator

文件：2.46867 Mbytes Page：48 Pages

High efficiency step-down controller with embedded 2 A LDO regulator

文件：2.46867 Mbytes Page：48 Pages

No Rsense dual step-down controller with adjustable voltages for notebook system power

文件：2.93364 Mbytes Page：49 Pages

No Rsense dual step-down controller with adjustable voltages for notebook system power

文件：2.93364 Mbytes Page：49 Pages

No Rsense dual step-down controller with adjustable voltages for notebook system power

文件：2.93364 Mbytes Page：49 Pages

Dual synchronous step-down controller with adjustable LDO

文件：2.76446 Mbytes Page：47 Pages

Dual synchronous step-down controller with adjustable LDO

文件：2.76446 Mbytes Page：47 Pages

Dual synchronous step-down controller with adjustable LDO

文件：2.76446 Mbytes Page：47 Pages

Dual step-down main supply controller with auxilary voltages for notebook system power

文件：2.52387 Mbytes Page：52 Pages

Dual step-down main supply controller with auxilary voltages for notebook system power

文件：2.52387 Mbytes Page：52 Pages

Dual step-down main supply controller with auxilary voltages for notebook system power

文件：2.52387 Mbytes Page：52 Pages

Constant ON-time control

文件：1.06568 Mbytes Page：50 Pages