OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

OPAx863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • AEC-Q100 Qualified for Automotive Applications – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110-MHz – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage n

OPA2863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input/Output Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110 MHz – Gain-bandwidth product: 50 MHz • Low power – Quiescent current: 700 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage

双路低功耗 110MHz 12V RRIO 电压反馈放大器

OPAx863 器件是单位增益稳定的低功耗、轨至轨输入/输出、电压反馈运算放大器，需在 2.7V 至 12.6V 的电源电压范围内运行。OPAx863 器件每通道仅消耗 700µA 的电流，提供的增益带宽积为 50MHz、压摆率为 105V/µs，电压噪声密度为 5.9nV/√ Hz。\n\n具有 2.7V 电源电压的轨至轨输入级在便携式电池供电型应用中非常有用。差分输入级可在整个输入共模电压范围内很好地适应增益带宽积和噪声，从而在宽输入动态范围内实现出色的性能。OPA863 具有断电 (PD) 模式，PD 静态电流为 1.4µA（最大值），并在 6.5µs（典型值）之内开启或关闭。\n\nO • 宽带宽 \n• 带宽增益积：50MHz\n• 低功耗 \n• 断电模式：1.4µA（最大值）\n• 输入电压噪声：5.9nV/√ Hz \n• 轨至轨输入和输出\n• 工作温度范围： –40°C 至 +125°C\n• 过载功率限制\n• 输出短路保护;

OPAx863 Low-Power, 100-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：786.85 Kbytes Page：24 Pages

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：3.35139 Mbytes Page：42 Pages

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：3.38697 Mbytes Page：43 Pages

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

文件：3.03168 Mbytes Page：42 Pages

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

文件：3.38997 Mbytes Page：46 Pages

OPAx863A High-Precision, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1-μV/°C (maximum) • Low power – Quiescent current: 750-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V/μs • Rail-to-

OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1.2-μV/°C (maximum) • Low power – Quiescent current: 800-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 6.3-nV/√Hz • Slew rate: 100-V/μs • Rail-t

OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1.2-μV/°C (maximum) • Low power – Quiescent current: 800-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 6.3-nV/√Hz • Slew rate: 100-V/μs • Rail-t

OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50 MHz • High precision – Input offset voltage: 95 μV (maximum) – Offset drift: 1.2 μV/°C (maximum) • Low power – Quiescent current: 800 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage noise: 6.3 nV/√Hz • Slew rate: 100 V/μs • Rail-t

OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

双路、高精度、低功耗、105MHz、12V RRIO 电压反馈放大器

OPA863A 和 OPA2863A 器件 (OPAx863A) 是单位增益稳定的低功耗、轨到轨输入和输出、电压反馈运算放大器。这些器件经过封装调整，可提供高精度性能，最大输入失调电压为 95µV，温漂为 1.2µV/℃，可在整个温度范围内实现高精度测量。\n\nOPAx863A 每通道仅消耗 800µA，可提供 50MHz 的增益带宽积、100V/µs 的压摆率和 6.3nV/√Hz 的电压噪声密度。由 2.7V 电源供电的轨到轨输入级适用于便携式电池供电型应用。轨到轨输入级可在整个输入共模电压范围内很好地匹配增益带宽积和噪声，从而在宽输入动态范围内实现出色的性能。\n\nOPAx863A • Gain-bandwidth product: 50-MHz \n• Input offset voltage: 95-µV (maximum)\n• Low power \n• Supply voltage: 2.7-V to 12.6-V\n• Input voltage noise: 5.9-nV/√Hz\n• Rail-to-rail input and output\n• Operating temperature range: –40°C to +125°C\n• Overload power limit\n• Output short-circuit protection;

OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1.2-μV/°C (maximum) • Low power – Quiescent current: 800-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 6.3-nV/√Hz • Slew rate: 100-V/μs • Rail-t

丝印代码：28A3；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：O2863A；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：O2863A；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：2863A；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：2863A；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：2863A；OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

丝印代码：2863A；OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50 MHz • High precision – Input offset voltage: 95 μV (maximum) – Offset drift: 1.2 μV/°C (maximum) • Low power – Quiescent current: 800 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage noise: 6.3 nV/√Hz • Slew rate: 100 V/μs • Rail-t

丝印代码：2863A；OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1.2-μV/°C (maximum) • Low power – Quiescent current: 800-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 6.3-nV/√Hz • Slew rate: 100-V/μs • Rail-t

丝印代码：2863A；OPAx863A High-Precision, 105-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Gain-bandwidth product: 50-MHz • High precision – Input offset voltage: 95-μV (maximum) – Offset drift: 1.2-μV/°C (maximum) • Low power – Quiescent current: 800-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 6.3-nV/√Hz • Slew rate: 100-V/μs • Rail-t

丝印代码：O2863D；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：O2863D；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：O2863D；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：O2863D；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

OPA2863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input/Output Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110 MHz – Gain-bandwidth product: 50 MHz • Low power – Quiescent current: 700 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage

OPAx863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • AEC-Q100 Qualified for Automotive Applications – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110-MHz – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Supply voltage: 2.7-V to 12.6-V • Input voltage n

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

汽车类双路低功耗 110MHz 12V RRIO 电压反馈放大器

OPA2863-Q1 是单位增益稳定的低功耗、轨到轨输入/输出、电压反馈运算放大器，旨在于 2.7V 至 12.6V 的电源电压范围内运行。 OPA2863-Q1 每通道仅消耗 700µA 的电流，提供的增益带宽积为 50MHz，压摆率为 105V/µs，电压噪声密度为 5.9nV/√Hz。\n\n轨到轨输入级使得 OPA2863-Q1 非常适合电流检测和光电二极管接口等通用应用。轨到轨输入级可在整个输入共模电压范围内很好地匹配增益带宽积和噪声，从而在宽输入动态范围内实现出色的性能。\n\n OPA2863-Q1 包括过载功率限制功能，可限制输出饱和时 I Q 的增加，从而避免电池供电的功率敏

OPA810-Q1 Automotive, 140MHz, Rail-to-Rail Input/Output, FET-Input Operational Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature: –40°C to +125°C, TA • Gain-bandwidth product: 70MHz • Small-signal bandwidth: 140MHz • Slew rate: 200V/μs • Wide supply range: 4.75V to 27V • Low noise: – Input voltage noise: 6.3nV/√Hz (f = 500kHz) – Input curren

OPA2863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input/Output Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110 MHz – Gain-bandwidth product: 50 MHz • Low power – Quiescent current: 700 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage

丝印代码：O2863Q；OPA2863-Q1 Automotive, Low-Power, 110-MHz, Rail-to-Rail Input/Output Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide-bandwidth – Unity-gain bandwidth: 110 MHz – Gain-bandwidth product: 50 MHz • Low power – Quiescent current: 700 μA/ch (typical) – Supply voltage: 2.7 V to 12.6 V • Input voltage

丝印代码：O263；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：O263；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

丝印代码：O263；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

包装：散装 描述：EVALUATION MODULE FOR OPA2863 VE 开发板，套件，编程器 评估板 - 运算放大器

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

文件：3.38997 Mbytes Page：46 Pages

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

文件：3.03168 Mbytes Page：42 Pages

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：3.38697 Mbytes Page：43 Pages

丝印代码：2FJ4；OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：3.35139 Mbytes Page：42 Pages

OPAx863 Low-Power, 100-MHz, Rail-to-Rail Input and Output, Voltage-Feedback Amplifier

文件：786.85 Kbytes Page：24 Pages

Surface Mount Microwave Schottky Detector Diodes

Description/Applications These Schottky diodes are specifically designed for both analog and digital applications. This series offers a wide range of specifications and package configurations to give the designer wide flexibility. Typical applications of these Schottky diodes are mixing, detectin

Ultra Low Noise Low Dropout Voltage Regulator

■ GENERAL DESCRIPTION The NJM2863/64 is a low dropout voltage regulator designed for VCO application. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. ■ FEATURES ● High Ripple Rejection 75dB typ. (f=1kHz) ● Output Noise Voltage V

Resonant-Mode Power Supply Controllers

文件：438.91 Kbytes Page：9 Pages

Resonant-Mode Power Supply Controllers

文件：438.91 Kbytes Page：9 Pages

Resonant-Mode Power Supply Controllers

文件：438.91 Kbytes Page：9 Pages