OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers

1 Features • Gain-bandwidth product: 50MHz • High precision: – Input offset voltage: 95μV (maximum) – Offset drift: 1.2μV/°C (maximum) • Low power: – Quiescent current: 800μA/ch (typical) – Supply voltage: 2.7V to 12.6V • Input voltage noise: 6.3nV/√Hz • Slew rate: 100V/μs • Rail-to-rail

Direct acting 2-way basic proportional valve

Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4 mm. It is based on the standard version of Type 2873. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.). Compared with the standard version, the valve is essenti

5.7 kV RMS Signal and Power Isolated RS-485 Transceiver with 짹15 kV IEC ESD

GENERAL DESCRIPTION The ADM2861E, ADM2863E, ADM2865E, and ADM2867E are 5.7 kV rms signal and power isolated RS-485 transceivers. These devices are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E). The devices pass radiated emissions testing to th

5.7 kV RMS Signal and Power Isolated RS-485 Transceiver with 짹15 kV IEC ESD

GENERAL DESCRIPTION The ADM2861E, ADM2863E, ADM2865E, and ADM2867E are 5.7 kV rms signal and power isolated RS-485 transceivers. These devices are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E). The devices pass radiated emissions testing to th

Shorty Universal Bushings

文件：113.19 Kbytes Page：1 Pages

3A 23V Synchronous PWM/PSM Step-Down

文件：527.08 Kbytes Page：10 Pages