Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

GaAs plastic infrared emitting diode

微功耗、单电源、轨到轨输入/输出运算放大器

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes Page：88 Pages

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode OP290 Series Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IR-transmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon photo

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode OP290 Series Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IR-transmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon photo

Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode OP290 Series Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IR-transmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon photo

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Plastic Infrared Emitting Diode

Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRtransmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD),

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：562.32 Kbytes Page：24 Pages

Plastic Infrared Emitting Diode

文件：290.2 Kbytes Page：8 Pages

Plastic Infrared Emitting Diode

文件：290.2 Kbytes Page：8 Pages

封装/外壳：T 1 3/4 包装：散装 描述：EMITTER IR 890NM 150MA T 1 3/4 光电器件 LED 发射器 - 红外，紫外，可见光

GaAs plastic infrared emitting diode

Plastic Infrared Emitting Diode

文件：290.2 Kbytes Page：8 Pages

封装/外壳：T 1 3/4 包装：散装 描述：EMITTER IR 890NM 150MA T 1 3/4 光电器件 LED 发射器 - 红外，紫外，可见光

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes Page：24 Pages

Cylindrical Case, High-Current and High-Voltage Circuits

Designed for frequencies ranging from 100 kHz to 3 MHz, Mica Capacitor Types 291, 292, 293 and 294 are well suited for high-current and high-voltage circuits like radio transmitters. Cast in cylindrical cases, these capacitors are electrically equivalent to MIL-C-5 Styles CM75 through CM93 in

MONROE 291

PRODUCT HIGHLIGHTS  Twelve LED color-coded display to accurately and quickly show measured decade values  Measures both resistivity and resistance-to-ground  Ranges 103 thru 1012  Easy-to-use  Battery powered  Pocket-sized convenience  Inexpensive, reliable

PLUGGABLE SERIES

文件：310.48 Kbytes Page：1 Pages

SMD Air Wound Coils

文件：66.33 Kbytes Page：2 Pages

Tape and Reel Specifications

文件：121.78 Kbytes Page：5 Pages