Silicon NPN Transistor High Current Amp, Fast Switch

Features: • High Power: 100W @ TC = +50°C, VCE = 40V • High Voltage: VCEO = 80V Min • High Current Saturation Voltage: VCE(sat) = 1.5V @ 10A • High Frequency: fT = 30MHz Min • Isolated Collector Package, No Isolating hardware Required

Bi-Polar transistor Selector Guide

Intergrated Circuit FM Stereo Transmitter

Description: The NTE7200 is a monolithic intergrated circuit in an 18-Lead DIP type package designed for use as a stereo transmitter. This device consists of a stereo modulator that creates stereo composite signals, an FM modulator that creates FM signals, and an RF amplifier. The stereo modula

Integrated Circuit Constant Current Single Output LED Driver

Description: The NTE7208 is a step-down constant current source designed for driving high power white LEDs. A standard output current of 350mA makes this driver compatible with a wide range of LEDs from many different manufacturers without the need for any external components. Despite its compa

TRANSISTOR TRANSISTOR LOGIC

TRANSISTOR TRANSISTOR LOGIC

Integrated Circuit FM Stereo Multiplex Decoder

Description: The NTE722 is a monolithic FM Stereo Multiplex Decoder System in a 14–Lead DIP type package. This integrated circuit demodulated a stereo multiplex signal into the right and left audio channels while inherently suppressing SCA frequency components. Internal provision is made for dr

Integrated Circuit FM Sound System

Description: The NTE723 is a monolithic integrated circuit FM detector/limiter and audio preamplifier that requires a minimum of external components for operation. It includes three stages of IF limiting and a differential–peak–detection circuit. Features: ● Simple detector alignment: one coil

Integrated Circuit Differential/Cascode Amplifier

Description: The NTE724 is a differential/cascode amplifier in an 8–Lead TO5 type metal can package designed for use in communications and industrial equipment operating at frequencies from dc to 120MHz. Features: • Controlled for Input Offset Voltage, Input Offset Current, and Input Bi

Integrated Circuit Dual Low Noise Preamp/OP Amp

Description: The NTE725 consists of two identical high–gain operational amplifiers constructed on a single chip. These 3–stage amplifiers use Class A PNP transistor output stages with uncommitted collectors. This enables a variety of loads to be employed for general purpose applications from DC

Integrated Circuit Wide Band Amplifier

Features: • Exceptionally High Amplifier Gain: Power Gain at 4.5MHz/s – 75dB (Typ) • Excellent Limiting Characteristics: Input Limiting Voltage (Knee) = 600µV (Typ) at 10.7MHz/s • Wide Frequency Capability: 100kHz/s to > 20MHz/s

Integrated Circuit Four Independent AC Amplifiers

Description: The NTE727 is a silicon monolithic integrated circuit in a 16–Lead DIP type package consisting of four independent identical AC amplifiers which can operate from a single–ended power supply. The amplifiers include internal DC bias and feedback to provide temperature–stabilized oper

TRANSISTOR TRANSISTOR LOGIC

Integrated Circuit FM Sound System

MC13-SERIES