Integrated Circuit Audio Power Amplifier, 32W

Description: The NTE7169 is a monolithic integrated circuit in a 5-Lead TO220 type package intended for use as an audio class AB audio amplifier. Thanks to its high power capability, the NTE7169 is able to provide up to 35W true RMS power into a 4Ω load (THD = 10, VS = ±18V, f = 1kHz) and up to

Integrated Circuit Audio Power Amplifier, 32W

Description:\nThe NTE7169 is a monolithic integrated circuit in a 5-Lead TO220 type package intended for use as an audio class AB audio amplifier. Thanks to its high power capability, the NTE7169 is able to provide up to 35W true RMS power into a 4Ω load (THD = 10%, VS = ±18V, f = 1kHz) and up t

500mA LED PROTECTOR

DESCRIPTION The AMC7169 is a two terminal LED protector with low dropout voltage rated for 500mA bypass current. Low operation current at monitoring mode and high bypass current capability at triggered mode. Build-in reverse diode for bypass reversed supply voltage. The AMC7169 is designed for p

Dual 5.8W Audio Power Amplifier Circuit

■ Overview The AN7169 is an integrated circuit designed for low distortion, low noise and low power dissipation audio set of 5.8W (13.2V, 4Ω) output. Stereo operation is enabled due to incorporating two amplifiers on one chip. 12-pin SIL package enabled compact and high integrated set. Therm

Power Supply for PMT Modules

POWER SUPPLIES FOR PHOTOMULTIPLIER TUBE MODULES The C7169 and C10709 are the power supply units which can be used for various photomultiplier tube (PMT) modules produced by Hamamatsu. These units can provide both the driving voltage and the control voltage.

UHF BAND GaAs POWER AMPLIFIER

DESCRIPTION The MGF7169C is a monolithic microwave integrated circuit for use in CDMA base handheld phone. FEATURES Low voltage operation : Vd=3.0V High output power : Po=28dBm typ. @f=1.85~1.91GHz Low distortion : ACP=-46dBc max. @Po=28dBm High efficiency :

Single-Phase Energy Measurement IC with 8052 MCU, RTC and LCD driver

文件：1.68353 Mbytes Page：148 Pages