Integrated Circuit Flyback Switching Regulator

Description: The NTE7166 is an integrated circuit in a 5-Lead Staggered TO3P type package and is specifically designed to satisfy the requirements for increased integration and reliability in off-line quasi-resonant flyback converters. This device incorporates a primary control and drive circui

Integrated Circuit Flyback Switching Regulator

Description:\nThe NTE7166 is an integrated circuit in a 5-Lead Staggered TO3P type package and is specifically designed to satisfy the requirements for increased integration and reliability in off-line quasi-resonant flyback converters. This device incorporates a primary control and drive circuit wi

24-BIT QUADRATURE COUNTER

GENERAL DESCRIPTION: The LS7166 is a CMOS, 24-bit counter that can be programmed to operate in several different modes. The operating mode is set up by writing control words into internal control registers (see Figure 8). There are three 6-bit and one 2-bit control registers for setting up the ci

16-Bit Grid Driver with 4 to 16-Decoder

GENERAL DESCRIPTION The MSC7166 is a driver IC designed to directly drive the grids of a vacuum fluorescent display tube. Since this IC has a built-in 4 to 16-line decoder and 16 output circuits, a signal device of MSC7166 can replace a set of the following three: two devices of either MSL912 or

OC-192 Very Short Reach (VSR) Converter IC

GENERAL DESCRIPTION The VSC7166 is used to interface between OC-192 Framers and Parallel Optical Modules. In the Serializer, 16-bit OC-192 data from the Framer is mapped and encoded onto twelve 1.244 Gb/s, 8b/10b outputs, with 1 of the twelve outputs being used for XOR protection and another of t

Single-Phase Energy Measurement IC with 8052 MCU, RTC and LCD driver

文件：1.68353 Mbytes Page：148 Pages

24-BIT QUADRATURE COUNTER

文件：107.29 Kbytes Page：15 Pages