TRIAC, 4 Amp

Description: The NTE5600 through NTE5607 TRIACs are designed primarily for full–wave AC control applications such as light dimmers, motor controls, heating controls and power supplies; or wherever full–wave silicon gate controlled solid–state devices are needed. TRIAC type thyristors switch from

TRIACs

TRIAC, 40 Amp Isolated Tab

Description: The NTE56030 and NTE56031 are 40 Amp TRIACs in a TO218 type package with an isolated tab designed to be driven directly with IC and MOS devices.

TRIAC, 40 Amp Isolated Tab

Description: The NTE56030 and NTE56031 are 40 Amp TRIACs in a TO218 type package with an isolated tab designed to be driven directly with IC and MOS devices.

TRIACs

The NTE5646 is a TRIAC that includes a DIAC trigger mounted inside the same package. This device saves the user the expense and assembly time of buying a discrete DIAC and assembling in conjunction with a gated TRIAC. The NTE5646 is a bidirectional AC switch and is gate controlled for either polar

TRIACs

The NTE5646 is a TRIAC that includes a DIAC trigger mounted inside the same package. This device saves the user the expense and assembly time of buying a discrete DIAC and assembling in conjunction with a gated TRIAC. The NTE5646 is a bidirectional AC switch and is gate controlled for either polar

TRIAC, 45 Amp

Features: ● Blocking Voltage of 600V ● Glass–Passivated Chip ● Gate Triggering Guaranteed in Four Modes ● Excellent Thermal Impedance and High Reliability Construction

TRIAC, 4A Sensitive Gate

Description: The NTE56039 is a glass passivated TRIAC in a plastic SOT89 type package designed for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants.

Ultrahigh-Speed Switching Applications

Features • Low ON resistance. • Ultrahigh-speed switching. • 4V drive. • Composite type with 2 MOSFETs contained in a single package, facilitaing high-density mounting.

14.2 mm (0.56 inch) Seven Segment Displays

Description The 14.2 mm (0.56 inch) LED seven segment displays are designed for viewing distances up to 7 metres (23 feet). These devices use an industry standard size package and pinout. Both the numeric and ± 1 overflow devices feature a right hand decimal point. All devices are available as

High Voltage High Speed Power Switch Application

Features • High Voltage High Speed Power Switch Application • Wide Safe Operating Area • Built-in Free Wheeling Diode • Suitable for Electronic Ballast Application • Small Variance in Storage Time

Multi-function, Multiple Voltage Power Supply

9-Line SCSI Active Terminator

文件：255.49 Kbytes Page：5 Pages