Silicon Complementary Transistors General Purpose Output & Driver for Audio Amplifier

Description: The NTE186 (NPN) and NTE187 (PNP) are silicon complementary transistors in a TO202 type case designed for use as output and driver stages of amplifiers operating at frequencies from DC to greater than 1MHz, series, shunt, and switching regulators, low and high frequency inverters/c

Complementary Transistors

Integrated Circuit Module - Color TV Switching Regulator

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Input AC Voltage, VACmax 280V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output Power, POmax AC: 90V to 280V 80W . . . . . . . . . . . . . . . . .

Integrated Circuit Module - Dual AF Power Amplifier, 50W/Ch, Dual Power Supplies

Features: • Built–In Muting Circuit to Cut–Off Pop Noise

Integrated Circuit Module – Dual AF Power Amplifier, 50W/Ch, Dual Power Supplies

Features:\n• Built–In Muting Circuit to Cut–Off Pop Noise

Integrated Circuit Module, 4 Output Positive Voltage Regulator for VCR

Features:\n• 4 Outputs\n• Output Voltage Select Function

Integrated Circuit Module, 4 Output Positive Voltage Regulator for VCR

Features: • 4 Outputs • Output Voltage Select Function

Integrated Circuit Module, Dual AF PO, 30W/Ch, Dual Power Supply

Features: • Dual Power Supply • For Optimum Performance, a Pre–Voltage Stage (such as NTE1338) is Required.

Integrated Circuit Module, Voltage Amp for 2 Power, 2 Channel, 40W to 50W AF Power Amp

Integrated Circuit Module, Voltage Amp for 2 Power, 2 Channel, 40W to 50W AF Power Amp

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 18W/Ch, Dual Power Supplies

Applications: • Video Projectors

Silicon Complementary Transistors Medium Power Audio Amplifier

Features: • 5W Output in Complementary Pair

Integrated Circuit Module, Dual AF PO, 30W/Ch Dual Power Supply

文件：81.33 Kbytes Page：2 Pages

Integrated Circuit Module, Dual AF PO, 28W/Ch, Dual Power Supply

文件：22.04 Kbytes Page：2 Pages

High-Speed Drivers with JFET Switch

Analog Switches with Dviver

Silicon Epitaxial Planar PIN Diode for High Frequency Attenuator

Features • Low forward resistance. (rf = 5.5 max) • MPAK package is suitable for high density surface mounting and high speed assembly.

Array LED 2 mm LED, Diffused

Features ● colored, diffused package ● for use as optical indicator ● available as multiple array (LED) ● load dump resistant acc. to DIN 40839

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE