Silicon PNP Transistor High Power, Low Frequency Driver

Features: • High Power Compact FTR Package: PC = 750mW • High Breakdown Voltage: VCEO = 80V

Bi-Polar Transistor Selector Guide

Integrated Circuit FM Limiter Circuit

Integrated Circuit FM Limiter Circuit

Integtrated Circuit Electronic Channel Selector

Description The NTE1402 is an integrated circuit in a 24–Lead DIP type package designed for electronic tuner by the preset volume method. Features • Simplifies Selection Circuit up to 16 Channels • Incorporating Clock Oscillator, Input Control, UP–DOWN Counter and Decoder Circuit

Integrated Circuit TV Sound IF Amplifier, Detector, AF Output Circuit

Description: The NTE1404 is an integrated circuit in a 16–Lead DIP w/Fin type package designed for use as a TV sound signal processing circuit. Features: • Provides Total TV Sound Signal Processing Circuitry from IF Amplifier through AF Output • DC Volume Control System: Control Volt

Integrated Circuit CMOS, Color Signal Processor for VCR

Description: The NTE1408 is a CMOS circuit in a 16–Lead DIP type package designed for use in VTR color signal processing circuitry for the VHS system video tape recorders. This device provides 4 color control signals, each having 90–degree phase shift.

Integrated Circuit Electronic Channel Selector

Description: The NTE1409 is an electronic channel selector integrated circuit in a 24–Lead DIP type package capable of selecting up to 16 channels. The output terminals are design to permit direct driving of LEDs or neon tubes. It consists of a Clock Oscillator circuit, a Channel Up and Down

Integrated Circuit Electronic Channel Selector

Description: The NTE1409 is an electronic channel selector integrated circuit in a 24–Lead DIP type package capable of selecting up to 16 channels. The output terminals are design to permit direct driving of LEDs or neon tubes. It consists of a Clock Oscillator circuit, a Channel Up and Down

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Chroma Video Signal Processor

Description: The NTE1410 is an integrated circuit in a 28–Lead DIP type package designed for all color TV video and chrominance signal process circuits. Features: • The NTE1410 provides a total video and chrominance signal processing circuitry, allowing compact set design • Incorpora

Integrated Circuit Video IF Amplifier

Description: The NTE1413 and NTE1545 are integrated circuits in a 16–Lead DIP type package designed for use as video IF amplifiers for color and monochrome television receivers Features: • Available for Two Types of Tuners: NPN Tuner (NTE1413) FET Tuner (NTE1545) • High G

Integrated Circuit Digital AC Clock Timer for VCR

Description: The NTE1414 is an LSI integrated circuit in a 40–Lead DIP type package designed for AC INPUT clock timers capable of randomly setting “ON hour” and “OFF hour” by a unit of a minute. This device can also work as a stopwatch timing up to 1 hour, 59 minutes and 59 seconds, and as a sl

Integrated Circuit Chrominance and Luminance Processor for NTSC Color TV

Description: The NTE1416 is an MSI integrated circuit in a 28–Lead DIP type package designed for NTSC systems to process both color and luminance signals for color televisions. This device provides two functions: The processing of color signals for the band pass amplifier, color synchronizer, a

Integrated Circuit Deflection Signal Processor

Description: The NTE1417 is an integrated circuit in a 24–Lead DIP type package designed for color TV deflection signal processing circuits. Features: • High Loop Gain in Vertical Circuit and Non–Adjustment for Vertical Linearity • Incorporating Vertical and Horizontal Oscillator Cir

Integrated Circuit Head Amp Circuit for VCR

Features: • Video Signal Pre−Amplifier Circuit • Filter Amplifier Circuit • Mixer Amplifier Circuit • Head Switch Over Circuit • Supply Voltage, either 9V or 12V

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit 3/4/8/12/16 Frequency Driver

Features: • Q, Q Outputs From each Flip−Flop • Equipped with Set Terminal • Two Dividers Operate with Independent Inputs

Integrated Circuit Playback Video Signal Processor for VCR

Features: • Drop−out Compensation Circuit • FM Demodulator • Noise Canceller Circuit • Mixer Amplifier Circuit • Limiter Circuit • Double Limiter Circuit Can Be Used • Supply Voltage, Either 9V or 12V

Integrated Circuit Capstan Servo Control Circuit for VCR

Features: • Phase Control Circuit • Speed Control Circuit • Capstan FG Divider Ratio Change Circuit • Sample Hold System Speed Control • Supply Voltage, Either 9V or 12V

Integrated Circuit VTR Reference Frequency Divider

Description: The NTE1427 is an integrated circuit designed for VTR’s reference frequency dividing. Features: • The functions consist of: 3.58MHz, 4.43MHz crystal oscillation Frequency divider circuit • Divider ratio changeable either for NTSC system or PAL system • Div

Integrated Circuit Cylinder Servo Control Circuit for VCR

Description: The NTE1428 is an integrated circuit designed for VTR’s cylinder servo control. Features: • Sample Hold System Speed Control • Incorporating Recording/Playback Switching Circuit • Supply Voltage Either 9V or 12V

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Preamp

Description: The NTE1433 is a linear integrated circuit in a 7–Lead SIP type package designed for use in high voltage preamplification applications. Features: • Power Supply with Wide Working Voltage Range (20–42 Volts) • High Open Loop Gain • Extremely Low Distortion • Low Noi

Integrated Circuit Voltage Comparator

Description: The NTE1434 is an integrated circuit in a 5–Lead SIP type package designed for use as a voltage comparator that operates from a single power supply. Features: • Low Input Current • Wide Operating Voltage Range • Low Power Dissipation • High Output Breakdown Voltage

Integrated Circuit Dual Audio Preamp

Description: The NTE1435 is an integrated circuit in a 9–Lead SIP type package designed for preamp applications incorporating two channels such as car stereo applications. With stabilized power source built–in, this device offers high gain, low distortion, low noise, and high output voltage.

Integrated Circuit VIR Signal Processor

Description: The NTE1437 is an integrated circuit designed for color TV VIR (Vertical Interval Reference) signal processing circuits (with auto tint compensation circuit). Features: • Incorporating VIR signal discriminator color control, tint control and Y signal amplifier on a single c

Integrated Circuit Dual Attenuator

Description: The NTE1439 is an integrated circuit in a 14–Lead DIP type package which logarithmically controls the throughput (gain) of an audio signal by the DC voltage or resistance value and has 2 circuits. Since voltage is internally stabilized, the stable operations are assured at the allo

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit FM IF Amplifier, Detector

Features: • High Limiting Sensitivity: 18µV Typ. • Low Distortion: 0.05 Typ Determined by the Linearity of Phase Characteristics in Phase Shifting Circuit • High Demodulation Output: 330mVrms Typ • High S/N Ratio: 78.5dB Typ • Muting at Detuning with Little Shock Noise • Single M

Integrated Circuit Balance Modulator

Features: • Broad Band (10MHz), Good Carrier Suppression • Carrier Suppression Within –40dB (10mVrms to 1Vrms Output Signal)

Integrated Circuit Servo Control for VCR

Integrated Circuit Servo Control for VCR

Integrated Circuit Low Noise Eqalizer Amp

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit 2−Channel, Low Noise, Equalizer Amp

Integrated Circuit 2−Channel, Low Noise, Equalizer Amp

Integrated Circuit 2−Channel, Low Noise, Equalizier Amp

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

Integrated Circuit Low Noise, Equailizer Amp

Absolute Maximum Ratings: Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 28V Power Dissipation (TA ≤ +80°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW Operating Temperature Range, Topt . . . . .

Integrated Circuit Low Noise, Equalizier Amp

Features: • High Open Loop Gain, Low Distortion • High S/N Because of High Gain at 1st Stage • Excellent Characteristics for Supply Voltage and Temperature

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Phase Lock Loop (PLL) FM Stereo Demod

Description: The NTE1461 is a multiplex integrated circuit in a 16−Lead SIP type package designed for use in FM car stereo applications. Due to its low distortion factor, this device can be used as a multiplex stereo demodulator appropriate for car component stereo units. Features: • Lo

Integrated Circuit Audio Preamp

Features: • Low Noise: VNI = 0.8μVrms (Typ.) • High Open Loop Voltage Gain: GVO = 92dB (Typ.) • Low Distortion: THD = 0.1 (Max.) at VOUT = 7Vrms, GV = 40dB, f = 1kHz

Integrated Circuit AF Power Amp for Tape Recorder

Features: • AF Output Power: 2.7W/3.2Ω, or 2.3W/4Ω • Small op Noise by Muting CRT • High Ripple Reduction • Good Supply Voltage Characteristics • No Switching Distortion at High Frequency

Integrated Circuit Audio Power Amplifier, 500mW

Description: The NTE1465 is an integrated circuit in a 9–Lead SIP type packge designed for use as an audio power amplifier in radio and portable cassette tape recorders. Features: • Output Power: PO = 500mW (Typ) @ VCC = 6V, RL = 8Ω, THD = 10 • Wide Operating Supply Range: VCC = 4V t

Integrated Circuit Preamp w/ALC Transistors

Features: • Pre–Amplifier (Recording or Playback) with ALC Transistors for Tape Recorder • Low Noise: VNI = 1.3µVrms (Typ) • Wide ALC Range • Operates from a Wide Range of Power Supplies: VCCopr = 3V to 15V

Integrated Circuit Audio, Low Power Output Amplifier

Features: • Low Noise: VNI = 1µVrms • Wide Operating Supply Voltage Range: VCC = 3.5 to 25V • 150mW Audio Output Power at VCC = 20V, RL = 150Ω Applications: • Line Output Amplifier • Recording Head Driver and Headphone Driver of Tape Recorder Deck.

Integrated Circuit Video IF & AFT

Features: • SAW Filter Connectable Without Preamp • Input Sensitivity: Vin = 50μVrms Typ. • Output Peak−to−Peak Voltage at Video Detector Adjustable Externally. • High S/N under Weak−Input Signal Functions: • PIF Amplifier • Video Detector • AFS with Defeat • Noise Can

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Power Amp, 2.5W for Table Top Stereo

Features: • High Gain 50dB • Low Distortion, Low Noise • Wide Range of Operation Voltage.

Integrated Circuit Color TV Deflection Signal Processor

Features: • On−chip blanking circuit: Simplifies output circuit design • Constant discharge current: No vertical output linearity adjustment • Horizontal oscillator frequency limiter: No X−ray protector malfunction • Hold−type operation for X−ray protector • Less reduction of impeda

Integrated Circuit Audio Power Amplifier, 1W for Tape Recorder

Integrated Circuit Audio Power Amplifier, 1W for Tape Recorder

Integrated Circuit Color & Video Signal Processor

Integrated Circuit Color & Video Signal Processor

Integrated Circuit FM IF Amp

Features: • High Sensitivity: VIN(lim) = 78dBμV • Wide Frequency Capabilitity • Regurated Voltage Output • Wide Operating Supply Voltage Range: VCC = 8V to 16V

Integrated Circuit CMOS, Phase-Locked Loop (PLL) Frequency Synthesizer for CB

Features: • Built–in high speed programmable divider for direct PLL system • PLL out–of–lock output available to inhibit transmittion. • Instantaneous call capability of channel 9 and 19. • Built–in detecting circuit of mis–program • Built–in amplifier for crystal oscillator • Bu

Integrated Circuit Audio Power Amplifier, 1.4W

Description: The NTE1476 is an audio power amplifier in a 10–Lead SIP type package designed for use as a power amplifier in portable cassette tape recorder applications. Features: • Recommended Supply Voltage: VCC = 7.5V, 9.0V • Output Power: POUT = 1.4W (Typ) at VCC = 7.5V, RL

Integrated Circuit 2 Channel Amplifier for Headphone Use

Description: The NTE1477 is a integrated circuit in a 14–Lead DIP type package suitable for use as a headphone driving amplifier in the output amplifier of a tape deck or a tuner. Features: • Wide Operating Voltage Range • Small Pop Noise by Means of Emitter Feedback • Dual Amplif

Integrated Circuit Solenoid Driver & Signal Sensing Circuit

Description: The NTE1478 is an integrated circuit in a 10–Lead SIP type package that detects the stopping of a rotary signal and drives a plunger. It is designed for use in auto–reverse and auto–eject car stereo applications and can be used as a solenoid driver in many other control circuits. Fe

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit 2−Channel Audio Preamp

Integrated Circuit 2−Channel Audio Preamp

Integrated Circuit Dual Recording Output Amplifier

Features: • Wide operation voltage range • Small pop noise • Dual amplifiers installed Applications: • Suitable for dual amplifiers of line output, of recording output, or headphone driving.

Integrated Circuit PLL FM Stereo Demodulator w/ Pilot Cancel

Features: • External parts are small. Coil is not used. • Pilot cancel function built−in. • Other functions: stereo demodulation, stereo/monaural automatic changeover and stereo indicator lamp driving circuit. • Stereo indicator lamp lighting and stereo/Monaural changeover operations a

Integrated Circuit Video IF System

Description: The NTE1483 is a silicon monolithic integrated circuit in a 22–Lead DIP type package designed for use in the PIF section in color TV receivers. As it contains a separate picture detector and sound IF detector, this device offers low buzz characteristics. The NTE1483 has all functio