Addressable peripheral drivers

DESCRIPTION The NE590/591 addressable peripheral drivers are high current latched drivers, similar in function to the 9334 address decoder. The device has eight Darlington power outputs, each capable of 250mA load current. The outputs are turned on or off by respectively loading a logic high

Addressable peripheral drivers

Call progress decoder

DESCRIPTION The NE5900 call progress decoder (CPD) is a low cost, low power CMOS integrated circuit designed to interface with a microprocessor-controlled smart telephone capable of making preprogrammed telephone calls. The call progress decoder information to permit microprocessor decisions whet

Call progress decoder

DESCRIPTION The NE5900 call progress decoder (CPD) is a low cost, low power CMOS integrated circuit designed to interface with a microprocessor-controlled smart telephone capable of making preprogrammed telephone calls. The call progress decoder information to permit microprocessor decisions whet

Call progress decoder

DESCRIPTION The NE5900 call progress decoder (CPD) is a low cost, low power CMOS integrated circuit designed to interface with a microprocessor-controlled smart telephone capable of making preprogrammed telephone calls. The call progress decoder information to permit microprocessor decisions whet

Addressable peripheral drivers

DESCRIPTION The NE590/591 addressable peripheral drivers are high current latched drivers, similar in function to the 9334 address decoder. The device has eight Darlington power outputs, each capable of 250mA load current. The outputs are turned on or off by respectively loading a logic high

Call progress decoder

1/4 COMMERCIAL PHONE PLUGS

1/4 COMMERCIAL PHONE PLUGS

Two-Terminal IC Temperature Transducer

GENERAL DESCRIPTION The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V, the device acts as a high impedance, constant current regulator passing 1 μA/K. Laser trimming of

2-Wire, Current Output Temperature Transducer

Description The AD590 is an integrated-circuit temperature transducer which produces an output current proportional to absolute temperature. The device acts as a high impedance constant current regulator, passing 1µA/oK for supply voltages between +4V and +30V. Laser trimming of the chip's thi

ADJUSTABLE FLANGE DISTRIBUTOR ADJUSTMENT

文件：68.38 Kbytes Page：2 Pages

SMT LEDs

文件：1.42021 Mbytes Page：9 Pages