PLUG MOUNTED FLAT FOOD PROBE TYPE ‘K’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplas

PLUG MOUNTED NEEDLE PROBE TYPE ‘K’

Description Needle probe plug mounted using a moulded connector. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplastic over mou

‘K’ TYPE 1 METER CURLY CABLE MINI PLUG TO MINI PLUG

Description A durable thermocouple connection cable which is manufactured from polyurethane cable and is supplied with a moulded male plug on both ends Features  TOUGH POLYURETHANE CABLE  Polyurethane cables are used in place of the standard PVC for the following reasons :-  Greater ret

DUAL PURPOSE SURFACE / IMMERSION PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of both surface temperatures and Immersion temperatures. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This results in a solid handle as opposed

LIGHT DUTY TYPE ‘K’ GENERAL PURPOSE PROBE

Description This probe uses the straight handle for fine control. The probe is truly general purpose and may be used for gas, liquid or applications with difficult access.

SURFACE (BAND) PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of surface temperatures giving a fast response time.

FINE WIRE (PTFE) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length PTFE wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug.

FINE WIRE (Fibre Glass) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length Fibre Glass wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug. Sensor

THA12 PLUG MOUNTED FLAT FOOD PROBE TYPE ‘T’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplast

PLUG MOUNTED MOVING AIR PROBE TYPE ‘K’

文件：69.13 Kbytes Page：1 Pages

THREADED STANDOFFS

[KEYSTONE] THREADED STANDOFFS

FEMALE THREADED STANDOFFS

[KEYSTONE] THREADED STANDOFFS

Inline flowmeter with paddle wheel, ELEMENT design

The paddle wheel device Type 8036 is specially designed for measuring the flow rate in solid-free liquids in a variety of applications (water, waste water monitoring, chemical processing, etc.). The device is made up of a compact sensor-fitting with paddle wheel (Type S030) and a transmitter (

Magnetic inductive Insertion flowmeter

The electromagnetic flowmeter Type 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more t

Vibrating level switch

The device Type 8110 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in all areas of process technology and can be used in liquids. Typical applications are overflow or run-dry protection. The small tuning fork (40 mm in lengt