SURFACE (BAND) PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of surface temperatures giving a fast response time.

FINE WIRE (PTFE) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length PTFE wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug.

FINE WIRE (Fibre Glass) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length Fibre Glass wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug. Sensor

PLUG MOUNTED FLAT FOOD PROBE TYPE ‘K’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplas

PLUG MOUNTED NEEDLE PROBE TYPE ‘K’

Description Needle probe plug mounted using a moulded connector. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplastic over mou

‘K’ TYPE 1 METER CURLY CABLE MINI PLUG TO MINI PLUG

Description A durable thermocouple connection cable which is manufactured from polyurethane cable and is supplied with a moulded male plug on both ends Features  TOUGH POLYURETHANE CABLE  Polyurethane cables are used in place of the standard PVC for the following reasons :-  Greater ret

DUAL PURPOSE SURFACE / IMMERSION PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of both surface temperatures and Immersion temperatures. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This results in a solid handle as opposed

THA12 PLUG MOUNTED FLAT FOOD PROBE TYPE ‘T’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplast

PLUG MOUNTED MOVING AIR PROBE TYPE ‘K’

文件：69.13 Kbytes Page：1 Pages

HIGH VOLTAGE CAPACITORS MONOLITHIC CERAMIC TYPE

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

Directional Couplers Mini, Octave Bandwidth

Description These miniature couplers are designed to provide sampling of the RF Power propagating in one direction on a transmission line. Features • Smallest and Lightest Couplers Available • 0.5 through 18 GHz, including Wideband Units • High Directivity - Low VSWR • Meets MIL-E-5400 Envir

Directional Couplers Mini, Octave Brandwidth

Aluminum Electrolytic Capacitors

文件：5.29445 Mbytes Page：66 Pages