HIGH VOLTAGE CAPACITORS MONOLITHIC CERAMIC TYPE

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

Directional Couplers Mini, Octave Bandwidth

Description These miniature couplers are designed to provide sampling of the RF Power propagating in one direction on a transmission line. Features • Smallest and Lightest Couplers Available • 0.5 through 18 GHz, including Wideband Units • High Directivity - Low VSWR • Meets MIL-E-5400 Envir

Directional Couplers Mini, Octave Brandwidth

Dead Blow Nylon Hammers

Die-cast one piece head and handle of aluminium alloy. Fitted with shock absorbent rubber grip. Screw-in faces of special nylon. The hollow head is partially filled with shot which adds to the weight and prevents re-bound. Allowing heavy and effective blows with maximum impact control.

Aluminum Electrolytic Capacitors

文件：5.29445 Mbytes Page：66 Pages

Snap Bushings

文件：133.28 Kbytes Page：1 Pages

包装：袋 描述：BOX CONDUCTIVE HINGED 2 X 2 X 1/ 静电控制，防静电，ESD，无尘室产品 静电控制器件容器，防静电仪器盒子

包装：盒 描述：VACUUM - ROTO-PIC PROBE - BENT - 工具 专用工具

Capacitive Sensor

Features ■M30 × 1.5 threaded barrel ■Plastic, PVDF ■Fine adjustment via potentiometer ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection Functional principle Capacitive proximity switches are designed for non-contact and wear-free detection of electricall

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

FIXED SIP DELAY LINE TR 1ns

FUNCTIONAL DESCRIPTION The 2020- and 2021-series devices are fixed, single-input, single-output, passive delay lines. The signal input (IN) is reproduced at the output (OUT), shifted by a time (TD) given by the device dash number. The characteristic impedance of the lines is nominally 50 ohms. Th

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES 316L stainless steel top housing (standard) A thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal Continuous duty design prevents loss of process fluid if pressure instrument is removed or fails Modular design allows for a suitable