FINE WIRE (PTFE) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length PTFE wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug.

SURFACE (BAND) PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of surface temperatures giving a fast response time.

FINE WIRE (Fibre Glass) THERMOCOUPLE SENSOR TYPE ‘K’

Description This sensor is constructed using a 1M length Fibre Glass wire constructed as a twisted pair. The wire used is Class 1 Type K alloys (NiCr / NiAl). A weld bead is manufactured at one end of the wire whilst the other end is terminated in a moulded miniature thermocouple plug. Sensor

PLUG MOUNTED FLAT FOOD PROBE TYPE ‘K’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplas

PLUG MOUNTED NEEDLE PROBE TYPE ‘K’

Description Needle probe plug mounted using a moulded connector. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplastic over mou

‘K’ TYPE 1 METER CURLY CABLE MINI PLUG TO MINI PLUG

Description A durable thermocouple connection cable which is manufactured from polyurethane cable and is supplied with a moulded male plug on both ends Features  TOUGH POLYURETHANE CABLE  Polyurethane cables are used in place of the standard PVC for the following reasons :-  Greater ret

DUAL PURPOSE SURFACE / IMMERSION PROBE TYPE ‘K’

Description This probe uses the straight handle for fine control. The probe is designed for the measurement of both surface temperatures and Immersion temperatures. Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This results in a solid handle as opposed

THA12 PLUG MOUNTED FLAT FOOD PROBE TYPE ‘T’

Description The probe is designed to monitor the temperature between cartons Sensor Features  TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This probe is manufactured using a two stage moulding technique. Firstly the probes are encased in tough nylon, then a thermoplast

LIGHT DUTY TYPE ‘K’ GENERAL PURPOSE PROBE

Description This probe uses the straight handle for fine control. The probe is truly general purpose and may be used for gas, liquid or applications with difficult access.

TYPE K PLUG MOUNTED GENERAL PURPOSE KIT

Description Comprising of four plug mounted probes, which can be plugged directly into a handheld thermometer, a fine wire (PTFE) Thermocouple Sensor, which can be left in situ and a handle, which enables the user to convert the plug mounted probes into standard length probes. This kit provides a

PLUG MOUNTED MOVING AIR PROBE TYPE ‘K’

文件：69.13 Kbytes Page：1 Pages

数字万用表

包装：卷带（TR） 描述：RESISTOR AXIAL 电阻器 通孔式电阻器

封装/外壳：轴向 包装：卷带（TR） 描述：RES 200 OHM 1% 1W AXIAL 电阻器 通孔式电阻器

Lamps for Photolithography

Description PerkinElmer Optoelectronics is a leading manufacturer of mercury short arc lamps ranging in output power from 1000 to 8000 watts. These lamps are used in the production of printed circuit boards, liquid crystal displays and semiconductors. The HSH Series lamps are used worldwide in mi

MICROMACHINED ACCELEROMETER

The XMMA series of silicon capacitive, micromachined accelerometers features; signal conditioning, a 4–pole low pass filter and temperature compensation. Zero–g offset full scale span and filter cut–off are factory set and require no external devices. A full system self–test capability verifies sy

Silicon planar type

文件：49.05 Kbytes Page：4 Pages

Silicon planar type

文件：49.05 Kbytes Page：4 Pages

Silicon planar type

文件：49.05 Kbytes Page：4 Pages