Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Triple Line Receiver

The MC10114 is a triple line receiver designed for use in sensing differential signals over long lines. An active current source and translated emitter follower inputs provide the line receiver with a common mode noise rejection limit of one volt in either the positive or the negative direction. T

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Triple Line Receiver

The MC10116 is a triple differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 11 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

The MC10117 is a dual 2–wide 2–3–input OR–AND/OR–AND–Invert gate. This general purpose logic element is designed for use in data control, such as digital multiplexing or data distribution. Pin 9 is common to both gates. • PD = 100 mW typ/pkg (No Load) • tpd = 2.3 ns typ • tr, tf = 2.2 ns typ (2

Dual 3-Input/3-Output OR Gate

Dual 3−Input/3−Ouput NOR Gate

Quad Exclusive OR Gate

Triple Line Receiver

文件：112.59 Kbytes Page：8 Pages

Triple Line Receiver

文件：112.59 Kbytes Page：8 Pages

Triple Line Receiver

文件：112.59 Kbytes Page：8 Pages

Triple Line Receiver

文件：112.59 Kbytes Page：8 Pages

Triple Line Receiver

文件：112.59 Kbytes Page：8 Pages

Quad Line Receiver

文件：86 Kbytes Page：4 Pages

Quad Line Receiver

文件：86 Kbytes Page：4 Pages

Quad Line Receiver

文件：86 Kbytes Page：4 Pages

Quad Line Receiver

文件：86 Kbytes Page：4 Pages

Quad Line Receiver

文件：86 Kbytes Page：4 Pages

Triple Line Receiver

文件：108.5 Kbytes Page：8 Pages

Triple Line Receiver

文件：108.5 Kbytes Page：8 Pages

Triple Line Receiver

文件：108.5 Kbytes Page：8 Pages

Triple Line Receiver

文件：108.5 Kbytes Page：8 Pages

Triple Line Receiver

文件：108.5 Kbytes Page：8 Pages

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

文件：109.05 Kbytes Page：8 Pages

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

文件：109.05 Kbytes Page：8 Pages

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

文件：109.05 Kbytes Page：8 Pages

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

文件：109.05 Kbytes Page：8 Pages

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

文件：109.05 Kbytes Page：8 Pages

3-CHANNEL PC POWER SUPPLY SUPERVISOR FOR 3.3V, 5V AND 12V

文件：84.97 Kbytes Page：7 Pages

17 GHz to 24 GHz, GaAs, MMIC, I/Q Upconverter

文件：607.19 Kbytes Page：26 Pages

17 GHz to 24 GHz, GaAs, MMIC, I/Q Upconverter

文件：607.19 Kbytes Page：26 Pages

17 GHz to 24 GHz, GaAs, MMIC, I/Q Upconverter

文件：607.19 Kbytes Page：26 Pages

Sampling A/D Converters

文件：123.84 Kbytes Page：1 Pages