Low voltage coefficient

文件：363.74 Kbytes Page：2 Pages

High Voltage/High Resistance Precision Thick Film Surface Mount

文件：363.74 Kbytes Page：2 Pages

Catalytic

文件：810.43 Kbytes Page：7 Pages

MC101催化燃烧式传感器

TRIPLE 2-INPUT EXCLUSIVE-OR GATE

TRIPLE 2-INPUT EXCLUSIVE-OR GATE

TRIPLE 2-INPUT EXCLUSIVE-NOR GATE

TRIPLE 2-INPUT EXCLUSIVE-NOR GATE

4-BIT SHIFT REGISTER

DIVIDE-BY-FOUR GIGAHERTZ COUNTER

DIVIDE-BY-FOUR GIGAHERTZ COUNTER

DUAL 4-5-INPUT OR/NOR GATE

DUAL 4-5-INPUT OR/NOR GATE

DUAL 4-5-INPUT OR/NOR GATE

DUAL 4-5-INPUT OR/NOR GATE

TRIPLE 2-INPUT EXCLUSIVE-OR GATE

TRIPLE 2-INPUT EXCLUSIVE-OR GATE

TRIPLE 2-INPUT EXCLUSIVE-NOR GATE

TRIPLE 2-INPUT EXCLUSIVE-NOR GATE

4-BIT SHIFT REGISTER

DIVIDE-BY-FOUR GIGAHERTZ COUNTER

DIVIDE-BY-FOUR GIGAHERTZ COUNTER

Quad OR/NOR Gate

The MC10101 is a quad 2–input OR/NOR gate with one input from each gate common to pin 12. •PD= 25 mW typ/gate (No Load) •tpd= 2.0 ns typ •tr, tf= 2.0 ns typ (20–80)

Quad 2-Input NOR Gate

The MC10102 is a quad 2–input NOR gate. The MC10102 provides one gate with OR/NOR outputs. • PD = 25 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad 2-Input OR Gate

Quad 2-Input OR Gate The MC10103 is a quad 2–input OR gate. The MC10103 provides one gate with OR/NOR outputs. •PD= 25 mW typ/gate (No Load) •tpd= 2.0 ns typ •tr, tf = 2.0 ns typ (20–80)

Quad 2-Input AND Gate

Description The MC10H104 is a quad 2−input AND gate. One of the gates has both AND/NAND outputs available. This MECL 10H™part is a functional/pinout duplication of the standard MECL 10K™family part, with 100 improvement in propagation delay, and no increase in power−supply current. Fe

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-3-2-Input OR/NOR Gate

Triple 2-3-2-Input OR/NOR Gate The MC10105 is a triple 2–3–2 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 4-3-3-Input NOR Gate

The MC10106 is a triple 4–3–3 input NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple 2-Input Exclusive OR/Exclusive NOR Gate

The MC10107 is a triple–2 input exclusive OR/NOR gate. • PD = 40 mW typ/gate (No Load) • tpd = 2.8 ns typ • tr, tf = 2.5 ns typ (20–80)

Dual 4-5-Input OR/NOR Gate

The MC10109 is a dual 4–5 input OR/NOR gate. • PD = 30 mW typ/gate (No Load) • tpd = 2.0 ns typ • tr, tf = 2.0 ns typ (20–80)

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used. • PD = 80 mW typ/pkg (No Load) • t

Dual 3-Input/3-Output OR Gate

Dual 3-Input/3-Output OR Gate The MC10110 is designed to drive up to three transmission lines simul– taneously. The multiple outputs of this device also allow the wire “OR”–ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines fro

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Dual 3?묲nput/3?뭀uput NOR Gate

The MC10111 is designed to drive up to three transmission lines simul− taneously. The multiple outputs of this device also allow the wire “OR”−ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. PD = 175 mW typ/pkg (No Load) tpd = 2.5 ns typ tr, tf = 2.0 ns typ (20 to 80)

Quad Exclusive OR Gate

The MC10113 is a quad Exclusive OR gate, with an enable common to all four gates. The outputs may be wire–ORed together to perform a 4–bit comparison function (A = B). The enable is active low. • PD = 175 mW typ/pkg (No Load) • tpd = 2.5 ns typ • tr, tf = 2.0 ns typ (20–80)

Triple Line Receiver

The MC10114 is a triple line receiver designed for use in sensing differential signals over long lines. An active current source and translated emitter follower inputs provide the line receiver with a common mode noise rejection limit of one volt in either the positive or the negative direction. T

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Quad Line Receiver

The MC10115 is a quad differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active curren

Triple Line Receiver

The MC10116 is a triple differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 11 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active

Dual 2-Wide 2-3-Input OR-AND/OR-AND Gate

The MC10117 is a dual 2–wide 2–3–input OR–AND/OR–AND–Invert gate. This general purpose logic element is designed for use in data control, such as digital multiplexing or data distribution. Pin 9 is common to both gates. • PD = 100 mW typ/pkg (No Load) • tpd = 2.3 ns typ • tr, tf = 2.2 ns typ (2

4-Wide OR-AND/OR-AND Gate

The MC10121 is a basic logic building block providing the simultaneous OR–AND/OR–AND–Invert function, useful in data control and digital multiplexing applications. • PD = 100 mW typ/pkg (No Load) • tpd = 2.3 ns typ • tr, tf = 2.5 ns typ (20–80)

Triple 4-3-3-Input Bus Driver

The MC10123 consists of three NOR gates designed for bus driving applications on card or between cards. Output low logic levels are specified with VOL = –2.1 Vdc so that the bus may be terminated to –2.0 Vdc. The gate output, when low, appears as a high impedance to the bus, because the output emi

Quad TTL to MECL Translator

The MC10124 is a quad translator for interfacing data and control signals between a saturated logic section and the MECL section of digital systems. The MC10124 has TTL compatible inputs, and MECL complementary open–emitter outputs that allow use as an inverting/ non–inverting translator or as a d