10位、低功耗、满摆幅电压输出、串行DAC，SOT23封装

MAX5711是小尺寸、低功耗、10位数模转换器(DAC)，工作于+2.7V至+5.5V的单电源。MAX5711片上精密输出放大器提供满摆幅输出。3V时消耗85µA电源电流，MAX5711尤其适用于便携式电池供电设备。\n\n MAX5711采用兼容SPI™/QSPI™/MICROWIRE™和DSP标准接口的3线串行接口。所有输入兼容于CMOS逻辑，并经过施密特触发器缓冲，允许直接接口光电耦合器。MAX5711含有上电复位(POR)电路，确保上电时DAC处于零电压输出状态。关断模式将电源电流消耗减小到0.3µA，通过软件命令设置。\n\n MAX5711提供微型6引脚SOT • -40°C至+125°C的宽工作温度范围\n• 85µA的低电源电流\n• 0.3µA的超低关断电源电流\n• +2.7V至+5.5V单电源\n• 快速20MHz兼容SPI/QSPI/MICROWIRE的3总串行接口和DSP兼容的串行接口\n• 施密特触发器输入直接接口光电耦合器\n• 满摆幅输出缓冲器\n• 上电复位置零输出\n• 软件可选的三种关断输出阻抗(100kΩ, 1kΩ, 高阻) \n• 小巧的6引脚SOT23封装;

10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23

文件：760.95 Kbytes Page：9 Pages

10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23

文件：760.95 Kbytes Page：9 Pages

封装/外壳：SOT-23-6 包装：管件 描述：IC DAC 10BIT V-OUT SOT23-6 集成电路（IC） 数模转换器（DAC）

10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23

文件：760.95 Kbytes Page：9 Pages

封装/外壳：SOT-23-6 包装：管件 描述：IC DAC 10BIT V-OUT SOT23-6 集成电路（IC） 数模转换器（DAC）

SCHOTTKY BARRIER DIODES

• 1N5711UR-1 AVAILABLE IN JAN, JANTX, JANTXV and JANS PER MIL-PRF-19500/444 • 1N5712UR-1 AVAILABLE IN JAN, JANTX, JANTXV and JANS PER MIL-PRF 19500/445 • SCHOTTKY BARRIER DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • METALLURGICALLY BONDED, DOUBLE PLUG CONSTRUCTION

SCHOTTKY BARRIER SWITCHING DIODE

Features • Ultra-Fast Switching Speed • High Reverse Breakdown Voltage • Low Forward Voltage Drop • Guard Ring Junction Protection Mechanical Data • Case: MiniMELF, Glass • Terminals: Solderable per MIL-STD-202, Method 208 • Marking: Cathode Band Only • Polarity: Cathode Band • Weight: 0

Schottky Diodes

Features • For general purpose applications • Metal-on-silicon Schottky barrier device which is protected by a PN junction guard ring. • The low forward voltage drop and fast switching make it ideal for protection of MOS devices, steering, biasing and coupling diodes for fast switch

AM/FM stereo radio circuit

文件：520.89 Kbytes Page：28 Pages