Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

两通道、三/四路、RGB视频开关及缓冲器

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

1.25?? Dual SPST, CMOS Analog Switches

General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Features ♦ Low On-Res

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

General Description The MAX4699/MAX4701/MAX4702 are low-voltage, single-supply CMOS analog switches. The MAX4699/MAX4701 are dual double-pole/double-throw (DPDT) switches with two control inputs that control two single-pole/double-throw (SPDT) switches each. The MAX4702 is a quad SPDT switch with

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

General Description The MAX4699/MAX4701/MAX4702 are low-voltage, single-supply CMOS analog switches. The MAX4699/MAX4701 are dual double-pole/double-throw (DPDT) switches with two control inputs that control two single-pole/double-throw (SPDT) switches each. The MAX4702 is a quad SPDT switch with

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

General Description The MAX4699/MAX4701/MAX4702 are low-voltage, single-supply CMOS analog switches. The MAX4699/MAX4701 are dual double-pole/double-throw (DPDT) switches with two control inputs that control two single-pole/double-throw (SPDT) switches each. The MAX4702 is a quad SPDT switch with

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

General Description The MAX4699/MAX4701/MAX4702 are low-voltage, single-supply CMOS analog switches. The MAX4699/MAX4701 are dual double-pole/double-throw (DPDT) switches with two control inputs that control two single-pole/double-throw (SPDT) switches each. The MAX4702 is a quad SPDT switch with

Low-Voltage, 60廓,4:1 Analog Multiplexer in QFN

General Description The MAX4704 low-voltage, 4-channel analog multiplexer operates from a single +1.8V to +5.5V supply. The MAX4704 features break-before-make switching action with a tON = 60ns and tOFF = 20ns at +3V. When powered from a +2.7V supply, the device has a 60Ω (max) on-resistance (RO

Low-Voltage, 60廓,4:1 Analog Multiplexer in QFN

General Description The MAX4704 low-voltage, 4-channel analog multiplexer operates from a single +1.8V to +5.5V supply. The MAX4704 features break-before-make switching action with a tON = 60ns and tOFF = 20ns at +3V. When powered from a +2.7V supply, the device has a 60Ω (max) on-resistance (RO

Low-Voltage, 60廓,4:1 Analog Multiplexer in QFN

General Description The MAX4704 low-voltage, 4-channel analog multiplexer operates from a single +1.8V to +5.5V supply. The MAX4704 features break-before-make switching action with a tON = 60ns and tOFF = 20ns at +3V. When powered from a +2.7V supply, the device has a 60Ω (max) on-resistance (RO

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Low-Voltage, 2ohm, SPST, CMOS Analog Switches

General Description The MAX4706/MAX4707 single-pole/single-throw (SPST) switches operate from a single 1.8V to 5.5V supply. The MAX4706 is a normally closed (NC) switch and the MAX4707 is the normally open (NO) version. Features ♦ Guaranteed RON    2Ω max (+2.7V Supply) ♦ Guaranteed RON Flatn

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

Two-Channel, Triple/Quad RGB Video Switches and Buffers

General Description The MAX463–MAX470 series of two-channel, triple/quad buffered video switches and video buffers combines high-accuracy, unity-gain-stable amplifiers with high-performance video switches. Fast switching time and low differential gain and phase error make this series of switches

低电压、双路DPDT/四路SPDT模拟开关，QFN封装

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：200.41 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：200.41 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

低电压、双路DPDT/四路SPDT模拟开关，QFN封装

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：200.41 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：200.41 Kbytes Page：11 Pages

Low-Voltage, Dual DPDT/Quad SPDT Analog Switches in QFN

文件：216.45 Kbytes Page：11 Pages

Low-Voltage, 60Ω, 4:1 Analog Multiplexer in QFN

文件：164.57 Kbytes Page：11 Pages

Low-Voltage, 60Ω, 4:1 Analog Multiplexer in QFN

文件：164.57 Kbytes Page：11 Pages

Low-Voltage, 60Ω, 4:1 Analog Multiplexer in QFN

文件：164.57 Kbytes Page：11 Pages

Low-Voltage, 60Ω, 4:1 Analog Multiplexer in QFN

文件：164.57 Kbytes Page：11 Pages

包装：卷带（TR） 描述：IC SWITCH SPST SC70-6 集成电路（IC） 模拟开关，多路复用器，解复用器

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages

Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers

文件：257.11 Kbytes Page：15 Pages