3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3969 is a recommended upgrade for the MAX3964, MAX3965, and MAX3968. The MAX3964A limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +

+3.0V至+5.5V、125Mbps至266Mbps限幅放大器，带有信号丢失检测器

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3969 is a recommended upgrade for the MAX3964, MAX3965, and MAX3968. The MAX3964A limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3964 limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +5.5V ♦ 2mVP-P Input Sensitivity ♦ 1.2ns Output Edge Speed ♦ Loss-of-Signal

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3964 limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +5.5V ♦ 2mVP-P Input Sensitivity ♦ 1.2ns Output Edge Speed ♦ Loss-of-Signal

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3969 is a recommended upgrade for the MAX3964, MAX3965, and MAX3968. The MAX3964A limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3969 is a recommended upgrade for the MAX3964, MAX3965, and MAX3968. The MAX3964A limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3969 is a recommended upgrade for the MAX3964, MAX3965, and MAX3968. The MAX3964A limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3964 limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +5.5V ♦ 2mVP-P Input Sensitivity ♦ 1.2ns Output Edge Speed ♦ Loss-of-Signal

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3964 limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +5.5V ♦ 2mVP-P Input Sensitivity ♦ 1.2ns Output Edge Speed ♦ Loss-of-Signal

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

General Description The MAX3964 limiting amplifier, with 2mVP-P input sensitivity and PECL data outputs, is ideal for low-cost ATM, FDDI, and Fast Ethernet fiber optic applications. Features ♦ Single Supply: +3.0V to +5.5V ♦ 2mVP-P Input Sensitivity ♦ 1.2ns Output Edge Speed ♦ Loss-of-Signal

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

文件：299.77 Kbytes Page：11 Pages

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

文件：299.77 Kbytes Page：11 Pages

3.0V to 5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector

文件：299.77 Kbytes Page：11 Pages

DUAL FULL-BRIDGE PWM MOTOR DRIVER WITH BRAKE

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),

Dual Full-Bridge PWM Motor Driver

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),

Dual Full-Bridge PWM Motor Driver

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),

DUAL FULL-BRIDGE PWM MOTOR DRIVER WITH BRAKE

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),

DUAL FULL-BRIDGE PWM MOTOR DRIVER WITH BRAKE

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),