Precision, Dual-Supply, SPST Analog Switches

General Description The MAX320/MAX321/MAX322 are precision, dual, SPST analog switches designed to operate from ±3V to ±8V dual supplies. The MAX320 has two normally open (NO) switches and the MAX321 has two normally closed (NC) switches. The MAX322 has one NO and one NC switch. Low power consu

高精度、双电源、SPST、模拟CMOS开关

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

FEATURES · Controlled Baseline – One Assembly/Test Site, One Fabrication Site · Extended Temperature Performance of –55°C to 125°C · Enhanced Diminishing Manufacturing Sources (DMS) Support · Enhanced Product-Change Notification · Qualification Pedigree (1) · RS-232 Bus-Pin ESD Protectio

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

±15kV ESD-Protected, 1μA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

±15kV ESD-Protected, 1μA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

±15kV ESD-Protected, 1μA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

15,-15kV ESD-Protected, 1muA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers

General Description The MAX3221E/MAX3223E/MAX3243E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data rate capabilities, and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver inputs are protec

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

FEATURES · Controlled Baseline – One Assembly/Test Site, One Fabrication Site · Extended Temperature Performance of –55°C to 125°C · Enhanced Diminishing Manufacturing Sources (DMS) Support · Enhanced Product-Change Notification · Qualification Pedigree (1) · RS-232 Bus-Pin ESD Protectio

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

FEATURES · Controlled Baseline – One Assembly/Test Site, One Fabrication Site · Extended Temperature Performance of –55°C to 125°C · Enhanced Diminishing Manufacturing Sources (DMS) Support · Enhanced Product-Change Notification · Qualification Pedigree (1) · RS-232 Bus-Pin ESD Protectio

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

FEATURES · Controlled Baseline – One Assembly/Test Site, One Fabrication Site · Extended Temperature Performance of –55°C to 125°C · Enhanced Diminishing Manufacturing Sources (DMS) Support · Enhanced Product-Change Notification · Qualification Pedigree (1) · RS-232 Bus-Pin ESD Protectio

MAX3222 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features 1• RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM) • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards • Operates With 3-V to 5.5-V VCC Supply • Operates Up to 250 kbps • Two Drivers and Two Receivers • Low Standby Current: 1 μA