110-175 Watt AC-DC Power Supplies

LPS170 series AC-DC power supplies are available with a nominal main output of 5 V, 12 V, 15 V or 24 V, adjustable over a wide 2:1 ratio. Auxiliary 12 V and 5 V standby outputs are also provided. Main output remote sense and single-wire current sharing are supported as standard. LPS170 power supplie ·Built-in EMI filter\n·5 Vstandby output\n·DC power good\n·Optional cover (-C suffix)\n·Thermal overload protection\n·Overvoltage protection\n·Low output ripple\n·Active power factor correction\n·IEC EN61000-3-2 compliance\n·Wide Range Adjustable output\n·Remote sense on main output\n·12 V Aux outpu;

包装：散装 描述：AC/DC CONVERTER 15V 110W 电源 - 外部/内部（板外） AC DC 转换器

175 Watts

文件：574.66 Kbytes Page：2 Pages

Total Power: 100 - 175 Watts

文件：878.71 Kbytes Page：4 Pages

Active power factor correction

文件：932.11 Kbytes Page：3 Pages

Active power factor correction

文件：782.86 Kbytes Page：3 Pages

Active power factor correction

文件：781.47 Kbytes Page：3 Pages

110-175 Watt Medical AC-DC Power Supplies

LPS170-M series medically-approved AC-DC power supplies are available with a nominal main output of 5 V, 12 V, 15 V or 24 V, adjustable over a wide 2:1 ratio. Auxiliary 12 V and 5 V standby outputs are also provided. Main output remote sense and single-wire current sharing are supported as standard. ·Medical safety approvals\n·Built-in EMI filter\n·5 Vstandby output\n·DC power good\n·Optional cover (-C suffix)\n·Thermal overload protection\n·Overvoltage protection\n·Low output ripple\n·Active power factor correction\n·IEC EN61000-3-2 compliance\n·Wide Range Adjustable output\n·Remote sense on m;

110-175 Watt Medical AC-DC Power Supplies

LPS170-M series medically-approved AC-DC power supplies are available with a nominal main output of 5 V, 12 V, 15 V or 24 V, adjustable over a wide 2:1 ratio. Auxiliary 12 V and 5 V standby outputs are also provided. Main output remote sense and single-wire current sharing are supported as standard. ·Medical safety approvals\n·Built-in EMI filter\n·5 Vstandby output\n·DC power good\n·Optional cover (-C suffix)\n·Thermal overload protection\n·Overvoltage protection\n·Low output ripple\n·Active power factor correction\n·IEC EN61000-3-2 compliance\n·Wide Range Adjustable output\n·Remote sense on m;

包装：盒 描述：AC/DC CONVERTER 15V 110W 电源 - 外部/内部（板外） AC DC 转换器

Medical safety approvals

文件：932.11 Kbytes Page：3 Pages

175 Watts

文件：265.29 Kbytes Page：2 Pages

P-channel silicon field-effect transistors

DESCRIPTION Silicon symmetrical p-channel junction FETs in a plastic TO-92 envelope and intended for application with analog switches, choppers, commutators etc. A special feature is the interchangeability of the drain and source connections.

N-CHANNEL MOS BROADBAND RF POWER FET

. . . designed primarily for wideband large–signal output and driver stages up to 200 MHz frequency range. • Guaranteed Performance at 150 MHz, 28 Vdc Output Power = 125 Watts Minimum Gain = 9.0 dB Efficiency = 50 (Min) • Excellent Thermal Stability, Ideally Suited For Class AOperati

P-channel silicon field-effect transistors

DESCRIPTION Silicon symmetrical p-channel junction FETs in plastic microminiature SOT23 envelopes.They are intended for application with analogue switches, choppers, commutators etc. using SMD technology. A special feature is the interchangeability of the drain and source connections.

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

L-BAND PA DRIVER AMPLIFIER

DESCRIPTION The µPG174TA is L-Band PA driver amplifier developed for digital cellular telephone and PCS applications. This device feature high output power and low distortion with 2.8 V low voltage and 35 mA low current operation. It is housed in a very small 6-pin minimold package available on t