4 to 10 Cell Battery Front End and Protector

Features ▪ VPACK voltages: 5V to 44V ▪ Hot plug tolerance ▪ Built-in low-side FET drivers ▪ Charger/load presence detection ▪ Cell open wire and system checks ▪ Autonomous detection and actions ▪ HVGPIO fuse blow configurable ▪ Support for wide range of current-sense resistors Application

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

16-Cell Battery Front End

Features ▪ High hot plug rating: 62V ▪ VCELL accuracy: ±5mV ▪ IPACK accuracy: ±0.2 ▪ 16-bit VCELL and IPACK measurements ▪ Charge/Load wakeup detection circuitry ▪ 4-pin GPIO port ▪ Integrated 3.3V regulator ▪ Supports I2C, SPI, and SWP communications Applications ▪ Light electric vehicl

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

The ISL94202 is a battery pack monitor IC that supports from three to eight series connected cells. It provides complete battery monitoring and pack control. The ISL94202 provides automatic shutdown and recovery from out-of-bounds conditions and automatically controls pack cell balancing. The ISL942 • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries\n• Stand-alone pack control - no MCU needed\n• Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels\n• Programmable detec;

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

丝印代码：94202IRTZ；Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

丝印代码：94202IRTZ；Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

丝印代码：94202IRTZ；Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

丝印代码：94202IRTZ；Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

3-to-8 Cell Li-ion Battery Pack Monitor

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing. The ISL94203

3 至 8 芯锂离子电池组监控器

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing.\nThe ISL94203 is hig • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries \n• Stand-alone pack control - no microcontroller needed \n• Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels \n• Programmabl;

3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

3-to-8 Cell Li-ion Battery Pack Monitor

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing. The ISL94203

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

3-to-8 Cell Li-ion Battery Pack Monitor

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing. The ISL94203

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

3-to-8 Cell Li-ion Battery Pack Monitor

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing. The ISL94203

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

3-to-8 Cell Li-ion Battery Pack Monitor

The ISL94203 is a Li-ion battery monitor IC that supports from 3 to 8 series connected cells. It provides full battery monitoring and pack control. The ISL94203 provides automatic shutdown and recovery from out of bounds conditions and automatically controls pack cell balancing. The ISL94203

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4 and Li-ion FePO4 chemistries • Stand-alone pack control - no microcontroller needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Programma

4- to 6-Cell Li-ion Battery Management Analog Front-End

The ISL94208 battery management IC is designed for use with a microcontroller and features an analog front-end with overcurrent protection for multi-cell Li-ion battery packs. The ISL94208 supports battery packs consisting of 4 to 6 cells in series and one or more cells in parallel. Using an

Standalone 3 to 8 Cell Li-Ion Battery Pack Monitor

Features • Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, Li-ion FePO4, and other chemistries • Stand-alone pack control - no MCU needed • Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrent protection levels • Pro

16-Cell Battery Front End

Features ▪ High hot plug rating: 62V ▪ VCELL accuracy: ±5mV ▪ IPACK accuracy: ±0.2 ▪ 16-bit VCELL and IPACK measurements ▪ Charge/Load wakeup detection circuitry ▪ 4-pin GPIO port ▪ Integrated 3.3V regulator ▪ Supports I2C, SPI, and SWP communications Applications ▪ Light electric vehicl

4 to 10 Cell Battery Front End and Protector

Features ▪ VPACK voltages: 5V to 44V ▪ Hot plug tolerance ▪ Built-in low-side FET drivers ▪ Charger/load presence detection ▪ Cell open wire and system checks ▪ Autonomous detection and actions ▪ HVGPIO fuse blow configurable ▪ Support for wide range of current-sense resistors Application

4- to 6-Cell Li-ion Battery Management Analog Front-End

• Software selectable overcurrent protection levels and variable protect detection times - 4 discharge overcurrent thresholds - 4 short-circuit thresholds - 4 charge overcurrent thresholds - 8 overcurrent delay times (charge) - 8 overcurrent delay times (discharge) - 2 short-circuit delay t

4- to 6-Cell Li-ion Battery Management Analog Front-End

The ISL94208 battery management IC is designed for use with a microcontroller and features an analog front-end with overcurrent protection for multi-cell Li-ion battery packs. The ISL94208 supports battery packs consisting of 4 to 6 cells in series and one or more cells in parallel. Using an

4- to 6-Cell Li-ion Battery Management Analog Front-End

• Software selectable overcurrent protection levels and variable protect detection times - 4 discharge overcurrent thresholds - 4 short-circuit thresholds - 4 charge overcurrent thresholds - 8 overcurrent delay times (charge) - 8 overcurrent delay times (discharge) - 2 short-circuit delay t

4- to 6-Cell Li-ion Battery Management Analog Front-End

• Software selectable overcurrent protection levels and variable protect detection times - 4 discharge overcurrent thresholds - 4 short-circuit thresholds - 4 charge overcurrent thresholds - 8 overcurrent delay times (charge) - 8 overcurrent delay times (discharge) - 2 short-circuit delay t

4- to 6-Cell Li-ion Battery Management Analog Front-End

The ISL94208 battery management IC is designed for use with a microcontroller and features an analog front-end with overcurrent protection for multi-cell Li-ion battery packs. The ISL94208 supports battery packs consisting of 4 to 6 cells in series and one or more cells in parallel. Using an

4- to 6-Cell Li-ion Battery Management Analog Front-End

The ISL94208 battery management IC is designed for use with a microcontroller and features an analog front-end with overcurrent protection for multi-cell Li-ion battery packs. The ISL94208 supports battery packs consisting of 4 to 6 cells in series and one or more cells in parallel. Using an

丝印代码：94208IRZ；4- to 6-Cell Li-ion Battery Management Analog Front-End

• Software selectable overcurrent protection levels and variable protect detection times - 4 discharge overcurrent thresholds - 4 short-circuit thresholds - 4 charge overcurrent thresholds - 8 overcurrent delay times (charge) - 8 overcurrent delay times (discharge) - 2 short-circuit delay t

Multi-Cell Li-ion Battery Pack OCP/Analog Front-End

文件：422.28 Kbytes Page：28 Pages

Multi-Cell Li-ion Battery Pack OCP/Analog Front-End

文件：1.10647 Mbytes Page：28 Pages

丝印代码：94200IRTZ；Multi-Cell Li-ion Battery Pack OCP/Analog Front-End

文件：1.10647 Mbytes Page：28 Pages

Multi-Cell Li-ion Battery Pack OCP/Analog Front-End

文件：422.28 Kbytes Page：28 Pages

Multi-Cell Li-ion Battery Pack Analog Front-End

文件：301.77 Kbytes Page：19 Pages

Multi-Cell Li-ion Battery Pack Analog Front-End

文件：801.33 Kbytes Page：19 Pages

Multi-Cell Li-ion Battery Pack Analog Front-End

封装/外壳：24-VFQFN 裸露焊盘 功能：电池监控器 包装：卷带（TR） 描述：IC BATT MON LI-ION 4-7CELL 24QFN 集成电路（IC） 电池管理

丝印代码：94201IRTZ；Multi-Cell Li-ion Battery Pack Analog Front-End

文件：801.33 Kbytes Page：19 Pages

Multi-Cell Li-ion Battery Pack Analog Front-End

文件：301.77 Kbytes Page：19 Pages

Series Charge/Discharge Path 3-to-8 Cell Li-Ion Battery Pack Monitor

文件：3.37864 Mbytes Page：89 Pages

Series Charge/Discharge Path 3-to-8 Cell Li-Ion Battery Pack Monitor

文件：3.37864 Mbytes Page：89 Pages

功能：电池监控器 包装：散装 描述：ISL94202 EVAL KIT 开发板，套件，编程器 评估和演示板及套件

丝印代码：94202IRTZ；Series Charge/Discharge Path 3-to-8 Cell Li-Ion Battery Pack Monitor

文件：3.37864 Mbytes Page：89 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：1.66708 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：1.66708 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：1.66708 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：1.66708 Mbytes Page：64 Pages

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages

3-to-8 Cell Li-ion Battery Pack Monitor

文件：1.66708 Mbytes Page：64 Pages

丝印代码：94203IRTZ；3-to-8 Cell Li-ion Battery Pack Monitor

文件：2.58618 Mbytes Page：64 Pages