Inductive Position Sensor IC

Features • Position sensing based on an inductive principle • Cost effective; no magnet required • Immune to magnetic stray fields; no shielding required • Suitable for harsh environments and extreme temperatures • Differential and single-ended sine and cosine outputs • Digital incremental

Inductive Position Sensor for High-Speed Motor Commutation

The IPS2200 is an industrial qualified, inductive position sensor IC capable of providing the absolute rotor position as sine and cosine. This IC uses the physical principle of Eddy currents to detect the position of a simple metallic target moving above a set of coils, consisting of one transmitter • Interface: sin/cos single-ended or differential\n• Qualified for Industrial market\n• Temperature range: -40°C to 125°C ambient\n• Voltage Supply: 3.3V ±10% or 5.0V ±10% \n• Rotational Speed: up to 250.000 rpm (electrical)\n• Propagation delay: programmable; < 10µs\n• Sin/Cos gain mismatch;

Inductive Position Sensor IC

文件：1.85582 Mbytes Page：35 Pages

Inductive Position Sensor IC

Features • Position sensing based on an inductive principle • Cost effective; no magnet required • Immune to magnetic stray fields; no shielding required • Suitable for harsh environments and extreme temperatures • Differential and single-ended sine and cosine outputs • Digital incremental

Inductive Position Sensor IC

Features • Position sensing based on an inductive principle • Cost effective; no magnet required • Immune to magnetic stray fields; no shielding required • Suitable for harsh environments and extreme temperatures • Differential and single-ended sine and cosine outputs • Digital incremental

Inductive Position Sensor IC

Features • Position sensing based on an inductive principle • Cost effective; no magnet required • Immune to magnetic stray fields; no shielding required • Suitable for harsh environments and extreme temperatures • Differential and single-ended sine and cosine outputs • Digital incremental

Inductive Position Sensor IC

Features • Position sensing based on an inductive principle • Cost effective; no magnet required • Immune to magnetic stray fields; no shielding required • Suitable for harsh environments and extreme temperatures • Differential and single-ended sine and cosine outputs • Digital incremental

封装/外壳：16-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：HIGH-SPEED INDUCTIVE POSITION SE 传感器，变送器 位置传感器 - 角度、线性位置测量

Inductive Position Sensor IC

文件：1.85582 Mbytes Page：35 Pages

Inductive Position Sensor IC

文件：1.85582 Mbytes Page：35 Pages

Inductive Position Sensor IC

文件：1.85582 Mbytes Page：35 Pages

包装：散装 描述：IPS2200 STARTER KIT FOR HIGH-SPE 开发板，套件，编程器 评估板 - 传感器

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integr

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integr

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integr

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integr

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film resistor network integr