VOLTAGE OUTPUT, UNIDIRECTIONAL MEASUREMENT CURRENT-SHUNT MONITOR

FEATURES • Wide Common-Mode Range: –16V to +80V • CMRR: 78dB • Accuracy: ±10mV Offset (max) ±7.5% Gain Error (max) 100μV/°C Offset Drift (max) • Bandwidth: Up to 130kHz • Transfer Function: 20V/V • Quiescent Current: 1600μA (max) • Power Supply: +2.7V to +18V • Provision for Filteri

具有直列式滤波器功能的高温、-16V 至 80V、分级电流感应放大器

The INA271 is a current-shunt monitor with voltage output and can sense drops across current shunts at common-mode voltages from –16V to +80V, independent of the supply voltage. The INA271 pinouts readily enable filtering.The INA271 is available with a 20V/V output voltage scale. The 130kHz bandwidt • Wide Common-Mode Range: –16V to +80V\n• Accuracy: ±10mV Offset (max) ±7.5% Gain Error (max) 100µV/°C Offset Drift (max)\n• Transfer Function: 20V/V\n• Power Supply: +2.7V to +18V\n• APPLICATIONS \n• High Temperature Environments\n• Supports Extreme Temperature Applications \n• One Assembly/Tes;

VOLTAGE OUTPUT, UNIDIRECTIONAL MEASUREMENT CURRENT-SHUNT MONITOR

文件：335.02 Kbytes Page：18 Pages

2.0 AMPERE COMPLEMENTARY POWER DARLINGTON TRANSISTORS 100 VOLTS 15 WATTS

Complementary Silicon Power Transistors . . . designed specifically for use with the MC3419 Solid–State Subscriber Loop Interface Circuit (SLIC). • High Safe Operating Area IS/B @ 40 V, 1.0 s = 0.375 A — TO–126 • Collector–Emitter Sustaining Voltage VCEO(sus) = 100 Vdc (Min) • High DC

Silicon Complementary Transistors Darlington Power Amp, Switch

Description: The NTE270 (NPN) and NTE271 (PNP) are silicon Darlington complementary power transistors in a TO218 type package designed for general purpose amplifier and low frequency switching applications. Features: • High DC Current Gain: hFE = 1000 Min @ IC = 5A, VCE = 4V • Collec

PROGRAMMABLE CMOS SINGLE OPERATIONAL AMPLIFIERS

DESCRIPTION The TS271 is a low cost, low power single opertional amplifier designed to operate with single or dual supplies. This operational amplifier uses the ST silicon gate CMOS process giving it an excellent consumption-speed ratio. This amplifier is ideally suited for low consumption appl

PROGRAMMABLE CMOS SINGLE OPERATIONAL AMPLIFIERS

DESCRIPTION The TS271 is a low cost, low power single opertional amplifier designed to operate with single or dual supplies. This operational amplifier uses the ST silicon gate CMOS process giving it an excellent consumption-speed ratio. This amplifier is ideally suited for low consumption appl

PROGRAMMABLE CMOS SINGLE OPERATIONAL AMPLIFIERS

DESCRIPTION The TS271 is a low cost, low power single opertional amplifier designed to operate with single or dual supplies. This operational amplifier uses the ST silicon gate CMOS process giving it an excellent consumption-speed ratio. This amplifier is ideally suited for low consumption appl