Frequency Generator & Integrated Buffers for Celeron & PII/III?

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Features: • Up to 150MHz frequency support • Support power management: CPU, PCI, stop and Power down Mode form I2C programming. • Spread spectrum for EMI control (0 to -0.5, ± 0.25). • Uses external 14.318MHz crystal

Frequency Timing Generator for PENTIUM II Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for Pentium II Systems

General Description The ICS9250-10 is a single chip clock for Intel Pentium II. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualification without

Frequency Timing Generator for PENTIUM II/III Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for PENTIUM II/III Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for PENTIUM II/III Systems

¢ Generates the following system clocks: -4 CPU clocks(2.5V, 100/133MHz) -8 PCI clocks, including 1 free-running (3.3V, 33MHz) -2 CPU/2 clocks (2.5V, 50/66MHz) -3 IOAPIC clocks (2.5V, 16.67TMHz) -4 Fixed frequency 66MHz clocks(3.3V, 66MHz) -2 REF clocks(3.3V, 14.318MHz) -1 USB clock (3.3V,4

Frequency Generator & Integrated Buffers for PENTIUM/ProTM

General Description The ICS9250-13 generates all clocks required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro or Cyrix. Eight different reference frequency multiplying factors are externally selectable with smooth frequency transitions. Spread spectrum may be enab

Frequency Timing Generator for Pentium II Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Supports spread spectrum modulation, down spread 0 to -0.5 and ± 0.25 center spread. • I2C support for power management • Efficient power management scheme through PD# • Uses external 14.138MHz crystal • Alternate frequency selections available through I2C control.

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 3 CPU (2.5V) 66.6/133.3MHz (up to 150MHz achievable through I2 C) • 9 SDRAM (3.3V) @ 133.3MHz (up to 150MHz achievable through I2 C) • 8 PCI (3.3 V) @33.3MHz • 2 IOAPIC (2.5V) @ 33.3MHz • 2 Hublink clocks (3.3 V) @ 66.6MHz • 2 USB (3.3V) @ 48MHz ( Non spread spectrum)

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 3 - CPUs @2.5V, up to 166MHz. • 17 - SDRAM @ 3.3V, up to 166MHz. • 7 - PCI @3.3V • 2 - IOAPIC @ 2.5V • 1 - 48MHz, @3.3V fixed. • 1 - 24MHz @ 3.3V • 2 - REF @3.3V, 14.318MHz. Features: • Up to 166MHz frequency support • Support power management: CPU, PCI, stop and Powe

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Up to 166MHz frequency support • Support power management: CPU, PCI, stop and Power down Mode form I2C programming. • Spread spectrum for EMI control (± 0.25 center spread) • Uses external 14.318MHz crystal Output Features: • 3 - CPUs @2.5V, up to 166MHz. • 17 -

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-19 is the single chip clock solution for Desktop/designs using BX, Appollo Pro 133 type of chip sets. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EM

Frequency Generator for P IV?

General Description The ICS9250-22 is a single chip clock solution. Spread spectrum typically reduces system EMI by 8dB to 10dB. This simplifies EMI qualification without resorting to board design iterations or costly shielding. The ICS9250-22 employs a proprietary closed loop design, which

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-23 is a single chip clock solution for desktop designs using the 810/810E style chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EMI by 8dB to 1

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 2 - CPUs @ 2.5V, up to 166MHz. • 13 - SDRAM @ 3.3V, up to 166MHz. • 2 - 3V66 @ 3.3V, 2x PCI MHz. • 8 - PCI @3.3V. • 1 - 48MHz, @3.3V fixed. • 1 - 24MHz @ 3.3V • 2 - REF @3.3V, 14.318MHz. Features: • Up to 166MHz frequency support • Support power management through PD#.

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Up to 153.33MHz frequency support • Support power management through PD#. • Spread spectrum for EMI control (± 0.25) center spread. • Uses external 14.318MHz crystal • FS pins for frequency select Output Features: • 2 - CPUs @ 2.5V, up to 153.33MHz. • 13 - SDR

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-26 is a single chip clock solution for 810/810E type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualific

Frequency Generator and Integrated Buffers for Celeron & PII/IIITM

General Description The ICS9250-27 is a single chip clock solution for 810/810E and 815 type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qual

Frequency Generator and Integrated Buffers for Celeron & PII/IIITM

Output Features: • 3 CPU (2.5V) (up to 133MHz achievable through I2C) • 9 SDRAM (3.3V) (up to 133MHz achievable through I2 C) • 7 PCI (3.3 V) @33.3MHz • 2 IOAPIC (2.5V) @ 33.3 MHz • 3 Hublink clocks (3.3 V) @ 66.6 MHz • 2 (3.3V) @ 48 MHz (Non spread spectrum) • 1 REF (3.3V) @ 14.318 MHz F

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-27 is a single chip clock solution for 810/810E and 815 type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10dB. This simplifies EMI quali

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-28 is part of a two chip clock solution for 810/810E and 815 type chipset. Combined with the ICS9112-17, the ICS9250-28 provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically re

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 2 CPU (2.5V) (up to 133MHz achievable through I2C) • 13 SDRAM (3.3V) (up to 133MHz achievable through I2C) • 2 PCI (3.3 V) @33.3MHz • 1 IOAPIC (2.5V) @ 33.3 MHz • 3 Hublink clocks (3.3 V) @ 66.6 MHz • 2 (3.3V) @ 48 MHz (Non spread spectrum) • 1 REF (3.3V) @ 14.318 MHz Fe

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-29 is a single chip clock solution for Solano type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualificat

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-30 is a single chip clock solution for desktop designs using the 810/810E style chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EMI by 8dB to 1

Frequency Generator & Integrated Buffers for PII/III?

Features: • Support power management: CPU, PCI, SDRAM stop from I2C programming. • Spread spectrum for EMI control (0 to -0.5) • Uses external 14.318MHz crystal Output Features: • 3 - CPUs @ 2.5V • 8 - PCI @ 3.3V • 2 - IOAPIC @ 2.5V • 1 - MREF @ 2.5V, DRCG memory refer

Frequency Generator with 200MHz Differential CPU Clocks

Features: • Almador Chipset has a DLL driving the clock buffer path for the 3 buffer path 66.6 MHz outputs, 66Buf(0:2). Almador board level designs MUST use pin 22, 66Buf_1, as the feedback connection from the clock buffer path to the Almador (GMCH) chipset. • Supports spread spectrum

Frequency Generator & Integrated Buffers for PIII & Tualatin™

Output Features: • 2 - CPUs @ 2.5V, up to 133MHz. • 13 - SDRAM @ 3.3V, up to 133MHz. • 3 - 3V66 @ 3.3V, 2x PCI MHz. • 8 - PCI @ 3.3V • 1 - 48MHz, @ 3.3V fixed • 1 - 24/48MHz @ 3.3V • 1 - REF @ 3.3V, 14.318MHz. • 1 - IOAPIC @ 2.5V 16.67MHz. Features: • Support PC133 SDRAM. • Up to 133MHz

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for PENTIUM II Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for Pentium II Systems

General Description The ICS9250-10 is a single chip clock for Intel Pentium II. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualification without

Frequency Timing Generator for PENTIUM II/III Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Timing Generator for PENTIUM II/III Systems

¢ Generates the following system clocks: -4 CPU clocks(2.5V, 100/133MHz) -8 PCI clocks, including 1 free-running (3.3V, 33MHz) -2 CPU/2 clocks (2.5V, 50/66MHz) -3 IOAPIC clocks (2.5V, 16.67TMHz) -4 Fixed frequency 66MHz clocks(3.3V, 66MHz) -2 REF clocks(3.3V, 14.318MHz) -1 USB clock (3.3V,4

Frequency Timing Generator for PENTIUM II/III Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Generator & Integrated Buffers for PENTIUM/ProTM

General Description The ICS9250-13 generates all clocks required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro or Cyrix. Eight different reference frequency multiplying factors are externally selectable with smooth frequency transitions. Spread spectrum may be enab

Frequency Timing Generator for Pentium II Systems

Coming Soon. If you have some information on related parts, please share useful information by adding links below.

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Supports spread spectrum modulation, down spread 0 to -0.5 and ± 0.25 center spread. • I2C support for power management • Efficient power management scheme through PD# • Uses external 14.138MHz crystal • Alternate frequency selections available through I2C control.

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 3 CPU (2.5V) 66.6/133.3MHz (up to 150MHz achievable through I2 C) • 9 SDRAM (3.3V) @ 133.3MHz (up to 150MHz achievable through I2 C) • 8 PCI (3.3 V) @33.3MHz • 2 IOAPIC (2.5V) @ 33.3MHz • 2 Hublink clocks (3.3 V) @ 66.6MHz • 2 USB (3.3V) @ 48MHz ( Non spread spectrum)

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Up to 166MHz frequency support • Support power management: CPU, PCI, stop and Power down Mode form I2C programming. • Spread spectrum for EMI control (± 0.25 center spread) • Uses external 14.318MHz crystal Output Features: • 3 - CPUs @2.5V, up to 166MHz. • 17 -

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-19 is the single chip clock solution for Desktop/designs using BX, Appollo Pro 133 type of chip sets. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EM

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-23 is a single chip clock solution for desktop designs using the 810/810E style chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EMI by 8dB to 1

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Output Features: • 2 - CPUs @ 2.5V, up to 166MHz. • 13 - SDRAM @ 3.3V, up to 166MHz. • 2 - 3V66 @ 3.3V, 2x PCI MHz. • 8 - PCI @3.3V. • 1 - 48MHz, @3.3V fixed. • 1 - 24MHz @ 3.3V • 2 - REF @3.3V, 14.318MHz. Features: • Up to 166MHz frequency support • Support power management through PD#.

Frequency Generator & Integrated Buffers for Celeron & PII/III?

Features: • Up to 153.33MHz frequency support • Support power management through PD#. • Spread spectrum for EMI control (± 0.25) center spread. • Uses external 14.318MHz crystal • FS pins for frequency select Output Features: • 2 - CPUs @ 2.5V, up to 153.33MHz. • 13 - SDR

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-26 is a single chip clock solution for 810/810E type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualific

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-27 is a single chip clock solution for 810/810E and 815 type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10dB. This simplifies EMI quali

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-28 is part of a two chip clock solution for 810/810E and 815 type chipset. Combined with the ICS9112-17, the ICS9250-28 provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically re

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-29 is a single chip clock solution for Solano type chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces EMI by 8dB to 10 dB. This simplifies EMI qualificat

Frequency Generator & Integrated Buffers for Celeron & PII/III?

General Description The ICS9250-30 is a single chip clock solution for desktop designs using the 810/810E style chipset. It provides all necessary clock signals for such a system. Spread spectrum may be enabled through I2C programming. Spread spectrum typically reduces system EMI by 8dB to 1

Frequency Generator & Integrated Buffers for PII/III?

Features: • Support power management: CPU, PCI, SDRAM stop from I2C programming. • Spread spectrum for EMI control (0 to -0.5) • Uses external 14.318MHz crystal Output Features: • 3 - CPUs @ 2.5V • 8 - PCI @ 3.3V • 2 - IOAPIC @ 2.5V • 1 - MREF @ 2.5V, DRCG memory refer

Frequency Generator with 200MHz Differential CPU Clocks

Features: • Almador Chipset has a DLL driving the clock buffer path for the 3 buffer path 66.6 MHz outputs, 66Buf(0:2). Almador board level designs MUST use pin 22, 66Buf_1, as the feedback connection from the clock buffer path to the Almador (GMCH) chipset. • Supports spread spectrum

Frequency Generator & Integrated Buffers for PIII & Tualatin™

Output Features: • 2 - CPUs @ 2.5V, up to 133MHz. • 13 - SDRAM @ 3.3V, up to 133MHz. • 3 - 3V66 @ 3.3V, 2x PCI MHz. • 8 - PCI @ 3.3V • 1 - 48MHz, @ 3.3V fixed • 1 - 24/48MHz @ 3.3V • 1 - REF @ 3.3V, 14.318MHz. • 1 - IOAPIC @ 2.5V 16.67MHz. Features: • Support PC133 SDRAM. • Up to 133MHz

Frequency Generator & Integrated Buffers for Celeron & PII/III™

Features: • Up to 150MHz frequency support • Support power management: CPU, PCI, stop and Power down Mode form I2C programming. • Spread spectrum for EMI control (0 to -0.5%, ± 0.25%). • Uses external 14.318MHz crystal

Frequency Generator for P IV?

General Description The ICS9250-22 is a single chip clock solution. Spread spectrum typically reduces system EMI by 8dB to 10dB. This simplifies EMI qualification without resorting to board design iterations or costly shielding. The ICS9250-22 employs a proprietary closed loop design, which

Frequency Generator with 200MHz Differential CPU Clocks

Features: • Almador Chipset has a DLL driving the clock buffer path for the 3 buffer path 66.6 MHz outputs, 66Buf(0:2). Almador board level designs MUST use pin 22, 66Buf_1, as the feedback connection from the clock buffer path to the Almador (GMCH) chipset. • Supports spread spectrum

Frequency Timing Generator for PENTIUM II Systems

Frequency Timing Generator for Pentium II Systems

Frequency Timing Generator for Pentium II Systems

文件：432.87 Kbytes Page：16 Pages

Frequency Timing Generator for PENTIUM II/III™ Systems

封装/外壳：56-BSSOP（0.295"，7.50mm 宽） 包装：卷带（TR） 描述：IC FREQ TIMING GENERATOR 56-SSOP 集成电路（IC） 应用特定时钟/定时