Low Skew Fan Out Buffers

General Description The ICS9179-03 generates low skew clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro. Outputs will handle up to 133MHz clocks. An output enable is provided for tesability.

Low Skew Fan Out Buffers

Features • Ten High speed, low noise non-inverting buffers for (to 133MHz), clock buffer applications. • Output slew rate faster than 1.5V/ns into 20pF • Supports up to four small outline DIMMS (S.O. DIMM). • Synchronous clocks skew matched to 250ps window on OUTPUTs (0:9). • I2C Serial Con

Zero Delay Buffers

General Description The ICS9179-06 generates low skew clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro. An output enable is provided for testability. The device is a buffer with low output to output skew. This is a zero delay buffer device, using

3 DIMM Buffer

Features • Thirteen high speed, low noise buffers, supports up to three SDRAM DIMMs. • Buffer outputs skew matched to within 250ps. • I2C Serial Configuration interface to allow individual OUTPUTs to be stopped low. • Multiple VDD, VSS pins for noise reduction • 3.3V±5 supply voltage • 28-

3 DIMM Buffer

General Description The ICS9179-12 is a buffer intended for reduced pin count 2 - chip Intel BX chipset designs An I2C interface is included, enabling individual outputs to be turned on or off. With 13 outputs, up to 3 DIMM are supported.

Low Skew Buffers

General Description The ICS9179B-01 generates SDRAM clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro or Pentium II. An output enable is provided for testability. The device is a buffer with low output to output skew. This is a Fanout buffer devic

Low Skew Buffers

General Description The ICS9179B-01 generates SDRAM clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro or Pentium II. An output enable is provided for testability. The device is a buffer with low output to output skew. This is a Fanout buffer devic

Zero Delay Buffers

General Description The ICS9179-06 generates low skew clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro. An output enable is provided for testability. The device is a buffer with low output to output skew. This is a zero delay buffer device, using

3 DIMM Buffer

General Description The ICS9179-12 is a buffer intended for reduced pin count 2 - chip Intel BX chipset designs An I2C interface is included, enabling individual outputs to be turned on or off. With 13 outputs, up to 3 DIMM are supported.

Low Skew Fan Out Buffers

General Description The ICS9179-03 generates low skew clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro. Outputs will handle up to 133MHz clocks. An output enable is provided for tesability.

3 DIMM Buffer

Low Skew Buffers

IC CLK BUFFER 1:18 150MHZ 48SSOP

封装/外壳：48-BSSOP（0.295"，7.50mm 宽） 包装：卷带（TR） 描述：IC CLK BUFFER 1:18 150MHZ 48SSOP 集成电路（IC） 时钟缓冲器，驱动器

封装/外壳：28-SSOP（0.209"，5.30mm 宽） 包装：卷带（TR） 描述：IC CLK BUFFER 1:10 133MHZ 28SSOP 集成电路（IC） 时钟缓冲器，驱动器

SMD 28 Pin Passive Delay Lines

SMD 28 Pin Passive Delay Lines

AM Receiver IC

DESCRIPTION The MAS9179 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz. Only a few external components are required for time signal receiving. The circuit has preamplifier, wide range aut

Countersunk Type H Rivets

文件：105.68 Kbytes Page：1 Pages

Customer Specification

文件：106.64 Kbytes Page：4 Pages

HANDLE

文件：38.82 Kbytes Page：1 Pages